Wall Mounted Type Series DEUTSCH ITALIANO FRANÇAIS ESPAÑOL G-Premium : AVXWP ENGLISH USER’S MANUAL System Air Conditioner (Cooling and Heating) E S F I D DB98-24114A(1) AVXWP@@_IB_E_24114.
Contents PREPARING YOUR AIR CONDITIONER Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . View of the Indoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH Register your product at www.samsung.com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. Risk of electric shock can cause injury or death. Disconnect all remote electric power supplies before servicing, installing or cleaning. Installation must be done by the manufacturer or service agent or a similar qualified person in order to avoid a hazard.
WARNING DURING OPERATION Users of this product are Never spill any kind of liquid Do not insert anything Do not place any obstacles in If the wireless remote When using a wireless Do not place any materials Do not connect the electric cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. front of the unit.
ENGLISH WARNING DISPOSING THE UNIT Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of Please recycle or dispose Install the outdoor unit so as Install the drain hose to let the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury.
CAUTION REGARDING POWER SOURCE Disconnect the circuit breaker Contact the service center or Contact the service center Do not open the front grille Avoid cold and hot air Avoid the water from Do not use the air conditioner Do not step on the air Do not drink the water from when you don’t use the air conditioner for a long time to save energy. manufacturer if you want to repair the air conditioner.
ENGLISH CAUTION DURING OPERATION Do not touch the pipes Do not use the air conditioner Do not give excessive shock Be sure that the air filter not to The appliance is not intended Max current is measured Turn off the air conditioner Do not clean the air The surface of the heat Clean the air filter every Be sure to insert the air filter. connected to the air conditioner. to maintain the machine, food, pet, plant or cosmetics. to the air conditioner.
View of the Indoor Unit Air Inlet Auto grille Room temperature sensor On/Off switch Air filter (under the grille) Remote Control Sensor Air flow blades (outlet) Operation indicator Timer indicator Sleep Timer indicator Set temperature & room temperature Fan speed setting Note If you want to turn On/Off the Display during operation, press the button on the remote control. The room temperature sensor senses air temperature around the sensor, and shows the temperature on the display.
ENGLISH Remote Control-Buttons and Display Operating mode Remote control transmission indicator Battery discharge indicator Fan speed Sleep mode On Timer setting ( AUTO, COOL, FAN, HEAT) DRY, Turbo mode Temperature setting Air flow direction Off Timer setting On/Off button Temperature adjustment buttons Mode selection button (AUTO, COOL, DRY, FAN, HEAT) Fan speed adjustment button Digital On/Off button Swing button Turbo button On Timer button Timer Set/Cancel button Off Timer button Sleep but
Getting Start You have just purchased a System air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features. The booklet is organized as follows.
ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Note Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the optimum temperature and the fan speed is selected automatically. 1 If necessary, press the Result: (On/Off ) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
ENGLISH Cooling Your Room You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling 1 If necessary, press the Result: (On/Off ) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. IMPORTANT 2 3 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.
Heating Your Room You must select the Heat mode if you wish to adjust the: Heating temperature Fan speed when heating 1 If necessary, press the Result: (On/Off ) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
ENGLISH Changing the Room Temperature Quickly The Turbo cooling/heating function is used to cool or heat your room as quickly as possible. For example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 2 If necessary, press the (On/Off ) button.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: (On/Off ) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
ENGLISH Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the (On/Off ) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears.
Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button one or more times as required. The outer blade is adjusted vertically. RECOMMENDATION 2 Adjust the blade to face... Cooling Heating Upwards. Downwards.
ENGLISH Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. E-19 AVXWP@@_IB_E_24114.
Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hours inclusive. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops.
ENGLISH Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hours inclusive. 2 Press the Result: (Set/Cancel) button to complete the setting. The remaining time is displayed. Blinking of the timer indicator stops.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of 6 hours. Note If you wish to switch the unit off at a specific time, refer to page 22. 1 Make sure that you have selected either COOL or HEAT mode. 2 Press the Result: button. The indoor unit beeps. The air conditioner will be controlled as indicated in the illustrations below.
ENGLISH Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner. Topic Recommendation Heating capacity The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors. If the temperature of the outside air drops, the air conditioner will heat less. If you find that the room is not warm enough, use an additional heating appliance.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped. Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes. High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
ENGLISH Cleaning Your Air Conditioner For the best use of your air conditioner, you must clean it every 2 weeks regularly to remove the dust that accumulates on the air filter. IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. 1 Slide the lower front grille down. 2 Slide the upper front grille up slightly, then open the grille by pulling right and left sides of the grille.
Cleaning Deodorizing and Bio Filters (Option) 020/022/026/028/035/036 Bio Filter Deodorizing Filter To remove minute dust particles and odors, deodorizing and Bio filters are installed in the air conditioner. You should clean the filters every 3 months. 1 Open the upper front grille by pulling right and left sides of the grille. 2 Pull out the deodorizing and Bio filters. 3 Wash the filters with clean water, then dry them in the shade. 4 Insert the filters into the original position.
ENGLISH Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not operate at all. Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if Off Timer is set. The temperature is not adjusted. Check if you selected the Fan mode.
Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center. Country BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K Customer Care Center 02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 (0,15 /min) 01805 - 121213 ( 0,12/min) 06 40 985 985 199 153 153 02 261 03 710 0900 20 200 88 ( 0.
