User Manual

E-19
ENGLISH
Selecting the Auto Cleaning Function
You can select the Auto Cleaning Function if you want to sterilize the
air conditioner or remove mold. Even when the air conditioner is turned off,
you can set this function.
1
If necessary, press the (On/Off) button.
Result: 
 The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the button.
Result:
 The indicator on the indoor unit lights up and the Auto
Cleaning function is set.
 When you turn the air conditioner off, it operates the Auto
Cleaning function for 30 minutes.
After 30 minutes, the air conditioner turns off.
 If you press the button when the air conditioner is turned off,
the air conditioner operates the Auto Cleaning Function for
30 minutes.
When the air conditioner
is turned Mode Operating time
On
Auto, Cool, Dry 30 minutes
Heat, Fan 15 minutes
Off 30 minutes
Note The Auto Cleaning indicator is displayed only on the indoor unit.
3
Press the button again to stop the Auto cleaning function before the end
of the 30-minute period.
Control Panel
Remote Control
AVXWH@@_IB_E_24831.indd 19 2006-01-06 ¿ÀÈÄ 6:06:08