User Manual

E-20
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a
given period of time. You can set the period of time from 30 minutes to 24 hours.
1
To set the operating time, press the button one or more times until the
required time is displayed. Possible time is between 0.5 hour and 24 hours
inclusive.
2
Press the (Set/Cancel) button to complete the setting.
Result: The remaining time is displayed.
Blinking of the timer indicator stops.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
3
To select an operating mode in advance, press the button until the desired
mode is displayed at the top of the remote control.
Result
: The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
1
Press the (Set/Cancel) button.
Note If you press the button when the On Timer is set,
the On Timer is also cancelled.
AVXWP@@_IB_E_24114.indd 20 2006-01-06 ¿ÀÈÄ 6:29:13