User Manual

18_ operating
operating basic function
SELECTING OPERATION MODE
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the
cold of winter.
1. Turn on the air conditioner.
Press the Power & Set/Cancel button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until
Heat mode indicator appears on the remote control
display.
The air conditioner operates in Heat mode and warms
your room.
When you press the
Mode button, mode will change
in order of Auto, Cool, Dry, Fan and Heat.
3. Set the temperature.
Press the Temperature or  button on the
remote control to increase or decrease the desired
temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4. Set the fan speed.
Press the Fan Speed button on the remote control
to set the desired fan speed.
If room temperature reaches desired value, heating will
stop for a while.
• When you press the Fan Speed button, fan
speed will change in order of Auto, Low, Medium
and High.
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts
while the air conditioner is warming up.
• Air flow can be adjusted manually. (See page 19 for instructions.)
• Since the air conditioner heats the room by taking heat energy from outdoor air, the
heating capacity may decrease when outdoor temperatures are extremely low. If you
feel the air conditioner insufficiently heats, using an additional heating appliance in
combination with the air conditioner is recommended.
AVXWN｣ｪ｣ｪ_IB_E_29217.indd 18 2008-03-27 ｿﾀﾈﾄ 6:52:15