User Manual

Assigning Address to Indoor Unit
E-16
Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
1
The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02)
and RMC(SW03) rotary switches.
2
K1
SW01 SW02 SW03RMC
SW04
SW05
SW06
K2 K3 K4
K5 K6 K7 K8
K9
K10
Setting Main Address
◆ The MAIN address is for communication between the indoor unit and the
outdoor unit. Therefore, you must set it to operate the air conditioner
properly.
◆ You can set the MAIN address from ‘00’ to ‘39’ by mixing SW01 and
SW02. The MAIN address from ‘00’ to ‘39’ should differ from each other.
◆ Check the indoor unit address on the plan that you are to install and set
the address according to the plan.
Setting RMC Address
◆ The SW03 RMC switch is the address setting switch for controlling the
indoor unit with the wired remote controller and centralized controller.
◆ You must set the SW03, K1 and K2 switch when using the wired remote
controller and centralized controller.
◆ You don’t have to set the SW03 RMC switch when not using the wired
remote controller and centralized controller.
0, 1, 2~9 00 ~ 09
SW01 SW02
Indoor unit
address
0, 1, 2~9 10 ~ 19
0, 1, 2~9 20 ~ 29
SW01 SW02
Indoor unit
address
0, 1, 2~9 30 ~ 39