ENGLISH
Contents PREPARATION Safety Precautions ......................................................................................................... Name of Each Part ......................................................................................................... Remote Control – Buttons and Display ............................................................... Inserting the Remote Control Batteries ............................................................... Getting Started ..........
ENGLISH Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions are provided to protect the users’ safety and prevent property damage. Make sure to read the followings and use the air conditioner properly. Keep this user’s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly. WARNING This indicates the possibility of serious injury or death.
WARNING DURING OPERATION Do not attempt to repair, move, modify or reinstall the unit on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center.
ENGLISH WARNING DISPOSING THE UNIT Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of Please recycle or dispose Install the outdoor unit so as Install the drain hose to let the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury.
CAUTION REGARDING POWER SOURCE Disconnect the circuit breaker Contact the service center or Contact the service center Do not open the front grille Avoid cold and hot air Avoid the water from Do not use the air conditioner Do not step on the air Do not drink the water from when you don’t use the air conditioner for a long time to save energy. manufacturer if you want to repair the air conditioner.
ENGLISH CAUTION DURING OPERATION Do not touch the pipes connected to the air conditioner. Do not use the air conditioner Do not give excessive shock The appliance is not intended The maximum input power & Do not clean the air The surface of the heat Dispose of the packaging All of the manufacturing and to maintain the machine, food, pet, plant or cosmetics. to the air conditioner. OTHERS Be sure that the air filter not to be exposed to direct sunlight.
Name of Each Part The design and shape can be changed according to the model.
ENGLISH Outdoor Unit AQV09/12NSASeries AQV09/12FSeries Air Inlet (Rear) Air Outlet Connection Valve Outdoor Unit AQV09/12NSBSeries Air Inlet (Rear) Air Outlet Connection Valve Outdoor Unit AQV18/24NSSeries AQV18/24FSeries Air Inlet (Rear) Air Outlet Connection Valve E-9
Remote Control-Buttons and Display Remote control transmission indicator Operating mode indicator ( AUTO, COOL, DRY, FAN, HEAT) Temperature setting Mode selection button (AUTO, COOL, DRY, FAN, HEAT) Temperature adjustment buttons Turbo function indicator Turbo button mode indicator Fan speed & Silence indicator Air flow direction On Timer indicator Off Timer indicator Fan speed adjustment button & Silence mode button Swing button On Timer button Off Timer button Battery discharge indicator button E-10
ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Note Use two AAA, LR03 1.5V batteries. Do not use old and new batteries or different kinds of batteries together. Insert two batteries correctly as indicated by the + and – symbols. 1 Remove the battery cover in the rear of the remote control by pushing it with your thumb.
Getting Started The User’s Manual provides you with valuable information about your air conditioner. In order to take full advantage of the air conditioner’s features, please read this manual carefully before using. You have already seen the basic description of the unit on pages from 8 to 10. Starting with the next page, you will find a series of step-by-step procedures for each function available.
ENGLISH Selecting Auto Mode You can select Auto mode if you want to cool or heat your room automatically. You can adjust the temperature in this mode. 1 2 Press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: button on the remote control until is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Auto mode.
Selecting Cool Mode You can select Cool mode if you want to cool your room. You can adjust the temperature and the fan speed when cooling. 1 2 Press the The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: button on the remote control until is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Cool mode. Note You can change modes at any time.
ENGLISH Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 2 Press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: button on the remote control until is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Heat mode.
Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 2 Press the The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: button on the remote control until is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode. Note 3 (On/Off) button.
ENGLISH Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 2 Press the The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: button on the remote control until is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Fan mode.
Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 2 3 Press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. Press the Result: mode.
ENGLISH Selecting the Energy Saving Function Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change mode, according to the three stages; Falling asleep, Sound sleep, and Waking up from and then the air conditioner will automatically turn off when the set time has elapsed. prevents you from having difficulty sleeping on extremely hot/cold nights.
Selecting the Turbo Function You can select the Turbo Function if you want to cool or heat your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 Press the Result: 2 Press the Result: E-20 (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. button.
ENGLISH Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. 3 Press the Note button again to stop the blade moving up and down. If you turn the air conditioner...
Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button until the desired time is displayed to set the On Timer. You can set the time between 0.5 hour and 24 hours. 2 Press the Result: 3 button to complete the setting. The remaining time is displayed. The timer indicator stops blinking. The selected mode and the temperature on the display disappear after 10 seconds.
ENGLISH Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button until the desired time is displayed to set the Off Timer. You can set the time between 0.5 hour and 24 hours. 3 Press the button to complete the setting. Result: The remaining time is displayed. The timer indicator stops blinking.
Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. 1 To switch the air conditioner on, press the ON/OFF switch on the right side of the indoor unit. Result: The OPERATION indicator on the indoor unit comes on. The indoor unit beeps. The air conditioner starts up in the most suitable mode for the room temperature.
ENGLISH Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. Before cleaning your air conditioner, ensure that you IMPORTANT have switched off the breaker used for the unit. 1 Open the upper front grille by pulling the lower right and left tabs of the grille. 2 Pull air filters out of each tab of the grille. 3 Remove all dust on the air filters with a vacuum cleaner or brush.
Temperature and Humidity Ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.
ENGLISH Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not operate at all. Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if Off Timer is set. The temperature is not adjusted. Check if you selected the Fan mode.
Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product, contact the SAMSUNG customer care center. Country Customer Care Center Web Site BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) CZECH REPUBLIC 800-726-786 (800 - SAMSUNG) www.samsung.com/cz DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk FINLAND 30 - 6227 515 www.samsung.com/fi FRANCE 01 4863 0000 www.samsung.
ENGLISH ESPAÑOL DEUTSCH PORTUGUÊS ITALIANO AQV09NSSeries AQV12NSSeries AQV18NSSeries AQV24NSSeries AQV09FSeries AQV12FSeries AQV18FSeries AQV24FSeries FRANÇAIS USER’S MANUAL HRVATSKI ROMÂNĂ БЪЛГАРСКИ (Cooling and Heating) EΛΛHNIKA Split - type Air Conditioner E S F I P D G Bu Ro Cr DB98-30671A(1) FORTE_Inv_30671A_IB_E.
