User Manual

Checking the remote controller
Remote controller buttons
• Pointtheremotecontrollertowardstheremotecontrollerreceiveroftheindoorunit.
• Whenyouproperlypressthebuttonontheremotecontroller,youwillhearbeepsoundfromtheindoorunitandatransmit
indicator( ) appears on the remote controller display.
Remote controller display
On Timer
Set the On Timer on.
O Timer
Set the O Timer on.
Single User
Turn on/o the Single User function
which reduces energy usage while
operating in cool/heat mode.
Auto Clean
Auto clean function – Dry inside of the
indoor unit to get rid of odor.
Fan


Adjust how much air ows through the air
conditioner with the 5 dierent fan speeds
such as Auto/Low/Medium/High/Turbo.
Set/Cancel
Set/Cancel the timer/ mode.
2
nd
F
Switch the function of the button on the
remote controller.
Vertical air swing
Activate/Deactivate air ow blade movement
automatically up and down.
Horizontal air swing
Activate/Deactivate air ow blade
movement automatically left and right.
(ARHSSD)
Mode
Set one of the 5 operating modes
(see pages 15~16 for instructions).
Quiet
Reduce noise generated from an indoor
unit during operation.
Power
Turn on/o the air conditioner.
Temp + -
Increase/Decrease the temperature by 1 ˚C.
d'light Cool
Has no this function.
Set the mode on.
Fast / Comfort
Select Fast function or Comfort function
Virus Doctor
Set the Virus Doctor function on/o.
(ARHSSD)
Display o (ARAWK/BWK )
To turn o the display light
SMART Air conditioner Network.
(ARHSFSA), (ARHSFNB), (ARHSSDB)
Filter Reset
Reset the Filter Clean reminder
Usage (ARAWK/BWK )
Display the amount of power consumption for few seconds on
the indoor unit display:
Beep o
To silence the beep sound when pressing the button.
• Whenyoupress2
nd
F button, the indicator will be displayed on the remote controller and you can change the
functions on the remote controller as listed below.
Single User  Filter Reset, d'light Cool  Usage, Auto Clean  Beep O, good’ sleep  Display O function.
If you select the function under the button while the function of the button is switched by 2
nd
F button, the 2
nd
F
function is canceled.
English-13
PREPARATION01
A3050 EU_IB_DB68-04211A_HP_EN 228.indd 13 2014-2-28 9:25:10