User Manual

Using the Single User function
This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
Press the Single User button on the remote controller while the air conditioner is
operating in Cool/Heat mode.

" " appears on the remote controller display for few seconds and disappears.

Single User indicator and air swing indicator ( ) appear automatically on the remote
controller display.
The air ow blades move up and down.

If the current set temperature is lower than 24°C in Cool mode, it will be automatically
raised to 24 °C.
• SingleUserfunctionisonlyavailableinCool/Heatmode.
• WhenSingleUserfunctionisactivatedinCoolmode,temperaturerangewill
be limited to 24 °C~30 °C. However, temperature range during Heat mode will
remain same at 16 °C~30 °C.
• Ifthedesiredtemperatureislowerthan24°CinCoolmode,turnotheSingle
User function by pressing the Single User button again.
• Temperature/Fanspeedcanalsobeadjusted(seepage16forinstructions).
• Airowcanbeadjusted.(seepage17forinstruction).
• IfyoupresstheMode button while the Single User function is on, it will cancel
the function.
Press the Single User button once again.Cancel
This function will produce positive ions and supply them into the airow.
Press the button on the remote controller.

indicator will appear on the remote controller display and the air conditioner
generates Virus Doctor.

Virus Doctor Lamp on the indoor unit will turn on when the Virus Doctor function is
on and it will turn o when the function is canceled.
• TheVirusDoctor function can be selected whether the air conditioner is
on/o.
• TheVirusDoctor function may not be available for some models.
Using the Virus Doctor function
Press the button once again.Cancel
(ARHSSD)
If using a multi system, this function is not supported.
English-22
A3050 EU_IB_DB68-04211A_HP_EN 228.indd 22 2014-2-28 9:25:13