User Manual
Fixing the installation plate
You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before xing
the installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,
pipe and hose pass to connect the indoor unit to the outdoor unit.
When facing the wall, the pipe and cable can be connected from the:
A
C
B
D
D
Direction of pipe
1. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameter
of 65mm so that it slants slightly downwards.
•Right(A)
•Left(B)
•Underside_right(C)
•Rear_rightorleft(D)
Wall
<20mm
Plastic
Anchor
2. Fix the indoor unit.
If you x the indoor unit on a wall
(1)Fixtheinstallationplatetothewallgivingattentiontotheweightoftheindoorunit.
If you x the indoor unit on a window frame
(1)Determinethepositionsofthewoodenuprightstobeattachedtothewindowframe.
(2)Attachthewoodenuprightstothewindowframegivingattentiontotheweightoftheindoorunit.
(3)Attachtheinstallationplatetothewoodenuprightusingtappingscrews.
If you x the indoor unit on a gypsum board
(1)Usestudndertondoutlocationsofthestuds.
(2)Fixtheplatehangerontwostuds.
• Ifyoumounttheplatetoaconcretewallusingplasticanchors,makesurethatgaps
between the wall and the plate, created by projected anchor, is less than 20mm.
• Searchforotherspotsiftherearelessthantwostuds,orthedistancebetweenthestudsaredierentfromthe
plate hanger.
• Fixtheinstallationplatewithoutincliningtooneside.
• Makesurethatawallcanwithstandtheweightoftheproduct.Ifyouinstalltheproductinaplacewhereitisnot
strong enough to withstand the product weight, the unit could fall and cause injury.
• Makesuretodrillonlyoneholeafterchoosing
the direction of the pipe.
(Unit:mm)
Model A B C D
AR09AWK
36 60 65 36
AR09BWK/CWK/BUR
12
AR07HSFN/HSFS
36 120 81 36
B
A
D
C
B
A
D
C
Pipehole(Ø65mm)
Pipehole(Ø65mm)
English-36
A3050 ET_IB&IM_DB68-04208A_HP_EN 1209.indd 36 2013-12-9 19:29:04










