User Manual

Using the Single User function
This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
Press the Single User button on the remote controller while the air conditioner is
operating in Cool/Heat mode.

" " appears on the remote controller display for few seconds and disappears.

Single User indicator and air swing indicator ( ) appear automatically on the remote
controller display.
The air ow blades move up and down.

If the current set temperature is lower than 24°C in Cool mode, it will be automatically
raised to 24 °C.
• SingleUserfunctionisonlyavailableinCool/Heatmode.
• WhenSingleUserfunctionisactivatedinCoolmode,temperaturerangewill
be limited to 24 °C~30 °C. However, temperature range during Heat mode will
remain same at 16 °C~30 °C.
• Ifthedesiredtemperatureislowerthan24°CinCoolmode,turnotheSingle
User function by pressing the Single User button again.
• Temperature/Fanspeedcanalsobeadjusted(seepage16forinstructions).
• Airowcanbeadjusted.(seepage17forinstruction).
• IfyoupresstheMode button while the Single User function is on, it will cancel
the function.
Press the Single User button once again.Cancel
Using the Quiet function
You can reduce the noise generated from an indoor unit.
Press the Quiet button on the remote controller while the air conditioner is operating
in Cool/Heat mode.

Quiet indicator appears on the remote controller display.

The indoor unit will operate more quietly.
• Ifusingamultisystem,thisfunctionwillworkonlywhentheQuietfunctionis
set on all operated indoor units.
Press the Quiet button once again.Cancel
If using a multi system, this function is not supported.
English-22
A3050 ET_IB&IM_DB68-04208A_HP_EN.indd 22 2013-11-15 18:32:10