A3050 ET WiFi APP_IB_04209A-00_EN.
Features of SMART Air conditioner Network Convenient control with Smart A/C application of a smart phone! You can conveniently control your air conditioner anywhere with Smart A/C application. Contents Preparation Installing network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing network [Connecting Network] Connect the wireless IP router to an air conditioner. [Registering service] Access the http://www.samsungsmartappliance.com and register the service. 01 PREPARATION Checking before using a wireless router This Wi-Fi Aircon support only below three encryption. -- Open (No encryption), WPA/TKIP, WPA2/AES -- You may not be able to establish Wi-Fi connection if other type of encryption is used.
Connecting network Checking Wi-Fi module installation 1 ffOpen the filter cover and check the Wi-Fi Module (①) attached on the panel front. The connection status between the Wi-Fi module and the wireless router can be checked by the Wi-Fi module described next page. ffTo replace the Wi-Fi module(Assembling or disassembling), follow the procedure below.
Assembling the Wi-Fi module 01 PREPARATION 1. Push the Wi-Fi module down into a slot and fix the hook on the top. 2. Connect the wire of the Wi-Fi module. 3. Close the cover of the sub panel.
Connecting network Checking network Check whether the wireless router connects with a smart phone. When the internet is not connected with a smart phone, the network function of the air conditioner cannot be used. 1. Search for the wireless router on the smart phone. 2. Select the wireless router you are using now on the searched wireless router list. 3. Check whether the smart phone can access the website http://www.samsungsmartappliance.com by the internet.
Connecting the wireless router with an air conditioner by the network (Select one of the 2 methods) Connecting network with a Smart phone APP NOTE • Android based smart phone users can download the Smart A/C application by searching ‘Samsung, Smart, A/C, AC, Air, Conditioner’ at android market or Samsung Apps. 01 PREPARATION Setting application on Samsung smart phone (Android based smart phone ) 2 1-2 1-1 3 1. After pressing the [2 F] button on the remote controller, press the [Wi-Fi] button.
Connecting network 4 5 6 4. Select the wireless router that you are using now. -- When using free wireless router, refer to the corresponding user manual for password. 5. After entering the password of selected wireless router, press the [OK] tab. -- When the password has not been set, press the [OK] tab without entering the password. 6. When 'Transfer complete' pop up comes on, press the [OK] tab.
Setting application on iPhone NOTE • iPhone users can download the Smart A/C application by searching ‘Samsung, Smart, A/C, AC, Air, Conditioner’ at Apple App store. 01 PREPARATION 3 4 1-2 1-1 1. After pressing the [2ndF] button on the remote controller, press the [Wi-Fi] button. -message will be displayed on the front display panel of the air conditioner. 2. Select [Settings] [Wi-Fi] on your iPhone. 3. From the list of Wi-Fi, select SMARTAIRCON and enter ‘1111122222’ as password. 4.
Connecting network 6 7 8 5 5. Press the [Setting Start] tab. 6. Select the wireless router that you are using now. -- When using free wireless router,refer to the corresponding user manual for password. 7. After entering the password of selected wireless router,press the [OK] tab. -- When the password has not been set, press the [OK] tab without entering the password. 8. Enter the information of wireless router and press the [OK] tab.
Connecting network with WPS setting 01 PREPARATION 2 1-2 1-1 1. After pressing the [2ndF] button on the remote controller, press the [WPS] button. message will be displayed on the front display panel of the air conditioner. 2. Press [WPS] button on the wireless router that will be connected to an air conditioner and operate the WPS function of the wireless router. (The location of WPS button may be different depending on the wireless manufacturing company.) 3.
Registering service Registering an air conditioner 1. Access Samsung Smart appliance website (http://www.samsungsmartappliance.com). 2. Enter the User ID and Password to log in. -- If you don’t have an account, press [Create a Samsung account] and fill in the form to become a member . 3 3. Select [My page][My page]. 4 4. Select [Add device] . English-12 A3050 ET WiFi APP_IB_04209A-00_EN.
5 01 PREPARATION 7 5. After entering the MAC written on the label sticker attached on the bottom part of the air conditioner, click the [Certify device]. 6. Restart the air conditioner you are using now. 7. When the device certification message appears, click [OK]. -- If the air conditioner you are registering is already registered by other users, a window will come on asking whether you want to delete the usage authority of the existing users, or not. 8.
Operating Smart A/C application ffAndroid based smart phone users can download the Smart A/C application by searching ‘Smart Air Conditioner’ at android market(Google Play Store) or Samsung Apps. ffiPhone users can download the Smart A/C application by searching ‘Smart Air Conditioner’ at Apple APP store. Home screen In-home You can control your air conditioner at home. Out-of-home Demo Play Network Setting You can control your air conditioner outside your home.
02 BASIC FUNCTION 4. Before you first access your air conditioner, you should get authentication. When authentication pop-up comes on, turn on the air conditioner within 20seconds. After getting the authentication successfully, you can log on to the air conditioner. Controlling an air conditioner ffCheck the control function of the air conditioner at AC control screen. Mode Set the basic operation of the air conditioner. Option Set the additional function of the air conditioner.
Operating Smart A/C application Setting additional functions of the air conditioner ffYou can control the additional functions the air conditioner supports. ffThe additional functions will be activated depending on the air conditioner functions. ffMy Wind, Usage, Filter Replacement, Error Notification, Color Of Wind function can be controlled only through the application. You must be connected to Wi-Fi and run the application in order to use these functions. 1.
Setting air conditioner information 02 BASIC FUNCTION ffChange air conditioner information or see the App version information, Open Source License by pressing the [Settings] tab. ffSet the name of the air conditioner by pressing the [AC Info Setting] tab. English-17 A3050 ET WiFi APP_IB_04209A-00_EN.
Operating Smart A/C application ffCheck the APP version by pressing the [Version] tab. Accessing Out-of-home 1. Press the [Out-of-home] tab. 2. After entering the ID and Password of Samsung Smart appliance website, press the [OK] tab. 3. Control your air conditioner outside home. -- Operating the Out-of-home is the same as ‘Accessing In-home’(refer to p12) 1 2 NOTE • You need to log in to operate Out-of-home. Enter the the ID and Password that you used to register the network service.
Troubleshooting Before you make a call to a service center, please check the items in the table below. Check point Solution Air conditioner cannot be found at Smart A/C application. Check whether the Smart phone and the air conditioner are connected to different wireless routers The Smart phone and the air conditioner should be connected to the same wireless router. Check whether the Wi-Fi( display is on. Check whether the air conditioner is correctly connected to a wireless router.
Open Source Announcement Open Source Announcement The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: oss.request@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution may be charged.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
Open Source Announcement END OF TERMS AND CONDITIONS This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
Open Source Announcement The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) 6.
Open Source Announcement It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
OpenSSL License Uthash Copyright (c) 2005-2013, Troy D. Hanson http://uthash.sourceforge.net All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Smart air conditioner APP can be altered without notice for quality improvement and also be deleted depending on the circumstances of manufacturing firms . DB68-04209A-00 A3050 ET WiFi APP_IB_04209A-00_EN.
Smart A/C application Air Conditioner user manual This manual is made with 100% recycled paper. imagine the possibilities A3050 ET WiFi APP_IB_04209A-00_EN.
