User manual

12_ viewing
viewing your air conditioner
CHECKING THE REMOTE CONTROL
You can activate the air conditioner by pointing the remote control away from it. When using the remote
control, always point it directly at the air conditioner.
When you press the button, a short beep will sound and a transmit indicator(
) appears
on the remote control display.
Remote control display
Power
Turn on/off the air conditioner.
Mode
Set one of the 5 operating modes
(see pages 14~18 for instructions).
Fan  
Adjust how much air flows
through the air conditioner with
the 5 different fan speeds such as
Auto/Silence/Low/Medium/High.
Smart Saver
Less energy usage makes your space
cool between the temperature range of
24ºC~30ºC.
On Timer
Set the On Timer on.
Off Timer
Set the Off Timer on.
Set the function on/off.
Air swing
Activate/Deactivate air flow blade
movement automatically up and down.
Turbo
Operate in auto fan speed to
cool/warm quicly.
Temp 
Increase/Decrease the temperature by
1˚C.
Comfort Care
Set the Comfort Care function on/off.
Filter Reset
Reset the Filter Clean reminder.
Set/Cancel
Set/Cancel the timer/ mode.
Set the mode on.
Evap.CLEAN
Evaporator clean function – Dry inside
of the indoor unit to get rid of odor.
Time 
Adjust the time for timer/ mode.
Temp/Humi
• Display the room humidity level and
temperature value for 5 seconds on
the indoor unit display:
- Hi: High (If the relative humidity is
70% or higher)
- Sd: Standard (If the relative humidity
is lower than 70%)
- For room temperature will be
displayed the value.
• Press and hold this button for 3
seconds to light off the indoor unit
display.