User Manual

ENGLISH

Sub PCB installation(optional)

(Wried remote controller, central remote controller etc.)

1. Turn the power o and take o the front panel of the indoor unit.

2. Take o the Cover PCB.

3. Attach the Sub PCB to the right side of the Panel-frame.

4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.

5. Connect the wire(remote controller, central remote controller etc) to the Sub

PCB.

6. Assemble the Cover PCB and the front panel.

• TheSubPCBisattachedtobecontrolledbythewiredremotecontrollerandcentralcontroller.

Only for multi system

Sub PCB

Cover PCB

Maldive EUR_AQV09P@_IBIM_32436A_E.indd 41 2010-12-27 14:07:02