User manual

E-20
Setting the On Timer
To Cancel the On Timer
1
Press the (Set/Cancel) button.
The On Timer enables you to switch on the air conditioner automatically after a
given period of time. You can set the period of time from 30 minutes to 24 hours.
You can select the On Timer only when the air conditioner
and the remote
control are off.
1
To set the operating time, press the button one or more times until the
required time is displayed.
Result:
 On is blinking if you press the button once.
 The time is increased 30 minutes or 1 hour every time you press
the button. You can set the period of time from 30 minutes to
24 hours.
2
Press the button to complete the setting.
Result:
 On stops blinking, the set time and
are displayed if
you press the button.
 Press the
button in 10 seconds and make sure that On
and time indicator are on display to confirm the setting.
If not, the setting in canceled automatically.
 The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
 Press the
button once again to cancel the setting.
3
To select an operating mode in advance, press the button until the
desired mode is displayed at the top of the remote control.
Result: The air conditioner will run in the selected mode when it is
turned on.
4
To adjust the temperature, press
.
 Press the
button until the temperature you want is displayed.
 You can adjust the temperature only in Cool/Dry mode.
It will turn to Cool mode automatically if you adjust the temperature
in Auto/Fan mode.
Note Vitalion function can not be set to be switched on automatically.
APC289ATE_IB_EA_25159-1.indd 20 2006-03-14 ¿ÀÀü 10:41:10