User manual

E-14
Selecting the Turbo Function
The Turbo cooling function is used to cool your room as quickly as possible.
Example : You have just come home and find that the room is very hot.
You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the (On/Off) button.
Result:
 The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the Cool mode.
 The indoor unit beeps.
2
Press the button.
Result:
 The temperature and fan speed are adjusted automatically.
 The air conditioner cools the room as quickly as possible.
 After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan speed.
But, if you press the button in Auto, Dry or Fan mode, it will
change to Turbo(Auto) mode automatically.
3
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button again.
Result: The air conditioner is reset automatically to the previous
mode, temperature and fan
speed .
Note  The temperature is not adjusted even if you press the button.
 The fan speed is not adjusted even if you press button
because it is set to Turbo
.
 If Turbo (Cool) is selected, air flow direction can be adjusted manually,
and if Turbo (Auto) is selected, air flow direction will be adjusted
automatically.
APC289ATE_IB_EA_25159-1.indd 14 2006-03-14 ¿ÀÀü 10:41:03