User manual

E-13
If the atmosphere in your room is stale, you can air the room using the Fan feature.
1
If necessary, press the (On/Off) button.
Result:
 The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the Cool mode.
 The indoor unit beeps.
2
If the Fan is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:

The indoor unit beeps each time you press the button
.
 The air conditioner runs in FAN mode.
Caution In FAN mode, cool air does not come out because the outdoor
unit does not run.
It will turn to Cool mode if you adjust the set temperature.
Note You can change modes at any time.
3
Select the fan speed by pressing the button one or more times until
the required setting is displayed:
Low
High Turbo
Result: Each time you press the button, the indoor unit beeps.
Note The default fan speed is set to High.
4
To select the Digital Flow, refer to page 17.
5
To control the direction of the air flow, refer to pages 18 and 19 .
Note If the air conditioner is supposed to be left unused for a long time,
it is recommended to dry the inside of the air conditioner by selecting
FAN mode before storing.
Selecting the Fan Mode
APC289ATE_IB_EA_25159-1.indd 13 2006-03-14 ¿ÀÀü 10:41:02