User manual

E-12
If the atmosphere in your room is very humid or damp, you can remove excess
humidity without lowering the room temperature too much. In DRY mode,
the quantity of air is adjusted automatically.
1
If necessary, press the (On/Off ) button.
Result
:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the Cool mode.
 The indoor unit beeps.
2
If the Dry is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
 The indoor unit beeps each time you press the button.
 The air conditioner runs in Dry mode.
Note You can change modes at any time.
3
To adjust the temperature, press the button one or more times until
the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive
.
Result
:  Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
 The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
Fan speed will be set to Auto automatically.
5
To select the Digital Flow, refer to page 17.
6
To control the direction of the air flow, refer to pages 18 and 19 .
Selecting the Dry Mode
APC289ATE_IB_EA_25159-1.indd 12 2006-03-14 ¿ÀÀü 10:41:01