User manual

E-10
Selecting the Cool Mode
Cool mode is used most frequently. You can control the temperature, fan speed,
and air flow direction as you want in the mode.
1
If necessary, press the (On/Off ) button.
Result:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the Cool mode.
 The indoor unit beeps.
2
If the Cool is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:  The indoor unit beeps each time you press the button.
 The air conditioner runs in Cool mode.
Note You can change modes at any time.
3
To adjust the temperature, press the button one or more times until
the required temperature is displayed. Possible temperatures are between
18°C and 30°C inclusive.
Result:  Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
 The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
 If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
Select the fan speed by pressing the button one or more times until
the required setting is displayed:
High Turbo Auto Low
Result: Each time you press the
button, the indoor unit beeps.
Note The default fan speed is set to High.
5
To select the Digital Flow, refer to page 17.
6
To control the direction of the air flow, refer to pages 18 and 19.
APC289ATE_IB_EA_25159-1.indd 10 2006-03-14 ¿ÀÀü 10:40:58