Product specifications

3 Disassembly and Reassembly
3-2 LW15M13C/LW17M11C
5. Remove 4 screws from the shield and lift up
the shield-panel.
6. Lift up the panel.
1. Place monitor face down on cushioned table.
Remove 4 screws from the stand and remove
4 screws from the rear cover.
(CAUTION : Remove screw grip don't on the
stand than fall the stand from the top side of
the foot.)
2. Insert the opening drive into the grooves at
each side and press until it clicks. Disconnect
IR cable and speaker cable from the shield.
3. Remove 8 screws from the shield and
disconnect shield.
4. Remove 4 screws IR board and remove 4
screws power board.
3-1-2 LW17M11C
SCART
SCART
SCART
SCART
SCART
SCART