Specifications

CHAPTER 3. OfficeServ 7200 Specifications OfficeServ 7200 General Description Guide
Page 3-10 © Samsung Business Communications
4 Rings and Tones
4.1 Ring Cycles
The OfficeServ 7200 provides trunk line, station, door and alarm rings. The on/off
cycle for each ring type is shown in Table 3.16.
Table 3.16 System Ring Cycles
Ring On/Off Cycle
Trunk line ring 400/200/400/3000 ms
Station ring 1000/2000 ms
Door ring 400/200/400/200/400/2000 ms
Alarm ring 400/200/400/200/400/200/400/1000 ms
Ring On/Off Cycle
The on/off cycle can be adjusted by changing the values in the system software.
4.2 Tones
For system ring signals, the output voltage is 75 V and the frequency is 20 Hz.
The OfficeServ 7200 provides users with various tones to notify them of the status
of functions and provide feedback. The on/off cycles of currently specified tones
are shown in Table 3.17.
Table 3.17 System Tone Cycles
Tone On/Off Cycle
Dial tone 1000/250 ms
Busy Tone 500/500 ms
Do Not Disturb tone 250/250 ms
Ring Back tone 1000/2000 ms
Call Park tone Continuous
Confirmation/Caution/Barge-In tone 50/50 ms
Call Back/Hold tone 500/3500 ms
Ring Back tone 1000/2000 ms
Error/Number Unobtainable tone 250/250 ms
Message Camp On tone Continuous