Specifications

CHAPTER 3. OfficeServ 7200 Specifications OfficeServ 7200 General Description Guide
Page 3-2 © Samsung Business Communications
1.1 Trunk Line Capacity
The maximum trunk line capacity of the OfficeServ 7200 is based on its configuration
and is shown in Table 3.2.
Table 3.2 Trunk Line Capacity
Analogue Digital
System Configuration
LOOP TRK BRI T1 TRK E1 TRK PRI TRK
Basic chassis 40 40 72 90 T1 : 72
E1 : 90
Basic chassis + expansion
chassis
80 80 96 120 T1 : 96
E1 : 120
1.2 Station (Subscriber) Line Capacity
The maximum station line capacity for analogue phones and digital phones in the
OfficeServ 7200 is based on its configuration and is shown in Table 3.3.
Table 3.3 Station Line Capacity
System Configuration Analogue phones Digital Phones
Basic chassis 80 80 (DS-5012L : 24)
Basic chassis + expansion
chassis
160 160 (DS-5012L : 48)
2 Electrical Specifications
2.1 Signal Specifications
The signal processing protocol is used for interfacing messages between the trunk
lines/stations and the system. Also, the signal processing protocol refers to the
method for providing status information.