Specifications

OfficeServ 7200 General Description Guide CHAPTER 2. OfficeServ 7200 Hardware

The components on the front panel of the MGI have the following functions:

Table 2.17 Ports and LEDs of the MGI

Ports & LEDs Function

LAN port Port connecting Ethernet.

SIO port UART port (for tests).

RST Button for resetting the MGI.

PWR LED This LED indicates the power supply status.

- Off : Power is not being supplied.

- On : Power is being supplied normally.

RUN LED This LED indicates MCP status.

- Off : Power is not being supplied.

- On : Booting.

- Blink : The RAM program is operating.

LAN Tx LED This LED indicates the status of Ethernet data transmission.

- Off : Data does not exist.

- On or blink : Data is being transmitted.

LAN Rx LED This LED indicates the reception status of the link and Ethernet data.

- Off : Data does not exist or the link is not connected.

- On or blink : Data is being received.

SVC LED This LED indicates if the service is being offered.

- LED blinks when the software task can be serviced.

DSP LED This LED indicates if the VoIP DSP is operating.

- LED blinks when the VoIP DSP operates.

RTPT LED This LED indicates if the voice packets are being forwarded.

- LED turns on when the voice packets are forwarded.

RTPR LED This LED indicates if the voice packets are being received.

- LED turns on when the voice packets are received.