Specifications

OfficeServ 7200 General Description Guide CHAPTER 2. OfficeServ 7200 Hardware
© Samsung Business Communications Page 2-19
Specifications
The specifications of the WIM data module are as follows:
y One V.35 serial port
y Two ports for connecting with the external Ethernet network
y One 10Base-T/100Base-Tx Ethernet port for the DMZ
y One 10Base-T/100Base-Tx Ethernet port for the station LAN
Front View
Figure 2.13 Front View of the WIM
The components on the front panel of the WIM have the following functions:
Table 2.14 Ports and LEDs of the WIM
Ports & LEDs Function
DMZ port Internal port (does not need firewalls)
LAN port Ethernet port connected with the Intranet
SERIAL connector Port connecting the dedicated serial line that works with the V.35
WAN1, WAN2 port WAN interface port that works with 10Base-T/100Base-Tx Ethernet
SIO port UART port (for tests)
RST Button for resetting the WIM module
RUN LED This LED indicates the operational status of the WIM.
- Off : The WIM module is in an abnormal status or power is not being
supplied.
- On : The WIM module is operating correctly.
DMZ LED This LED indicates the operational status of the DMZ.
- Off : The link is not connected.
- On : The link is operating.
SERIAL LED This LED indicates the operational status of the LAN.
- Off : The link is not connected.
- On : The link is operating.
WAN1, WAN2 LED This LED indicates the operation status of the WAN.
- Off : The link is not connected.
- On : The link is operating.
WIM
DMZ
WAN1
LAN
WAN2 SIO
SERIAL
RUN DMZ
LAN
WAN1 WAN2 SERIAL
RST