Specifications

CHAPTER 1. Introduction to the OfficeServ 7200 OfficeServ 7200 General Description Guide
Page 1-8 © Samsung Business Communications
LCP 16DLI 16SLI
TEPRI 8TRK 4DSL
MCP WIM
LIM
4WLI
8HYB
MGI
ISDN
PRI
WLAN
…..
Mobile Station
(WIP-5000M)
Laptop
A
P (WBS24)
OfficeServ 7200
Expansion
Chassis
Basic
Chassis
PSTN
T1/E1
Branch Office (OfficeServ 7200)
WAN
LAN
OfficeServ Feature
- VoIP UMS
- Mail Server
- SIP Server
SIP Phone
…..
Figure 1.2 Interfaces between the SIP Components
3 Programming
MMC programs are used to change the data used for system settings and operate at
three levels: technician (or system) level, customer level, and station (subscriber)
level. Subscribers can only program MMCs accessible at station level. A password
is required for technician-level and customer-level programming but not for
subscriber programming.
Technician-Level Programming
All MMCs can be programmed at this level. Programming can be done using any of
the display phones in the OfficeServ system.
Customer-Level Programming
A customer can only program the MMCs specified in MMC 802 (Customer Access
MMC Number). Programming can be done using any of the display phones in system.
Subscriber-Level Programming
Programming can be done only for an individual subscriber’s phone.
Refer to your Samsung OfficeServ 7200 Programming Guide for details.
8COMBO