Specifications

SAMSUNG General Description
DCS-816 February, 1999
4 - 22
include individual outside line, individual station, group of lines, group of stations
and one–touch speed dial keys. Using these keys eliminates dialling access
codes.
The following feature keys have extenders that make them more specific:
SPEED DIAL, SUPERVISOR, PAGE, DSS, DIRECTED PICKUP, GROUP
PICKUP, DOOR PHONE, BOSS, PROGRAMMED MESSAGE, IN AND OUT OF
GROUP and FORWARD. The extender can be a station, a group or another
identifying number.
Programmed Station Messages
Any station may select one of 20 messages to be displayed at a calling party's
keyset. Ten messages are factory–programmed and the remaining 10 can be
customised by the system administrator (16 characters maximum).
NOTE
The calling party must have a display keyset to view these messages.
Protection From Barge–In
Each station can be programmed as secure or not secure. Secure stations
cannot be barged–in on. A station that is not secure cannot be barged–in on
when talking to a secure station.
Pullout Directory Tray
A pullout directory tray is conveniently located beneath all keysets. It is used to
record station directory names and speed dial numbers.
Pulse To Tone Switch Over
When dialling a number on a dial pulse network, a station user can dial # and
the system will begin to send DTMF.
Redial
There are three types of external redial available to all station users. Each type
can redial up to a maximum of 18 digits.
• Auto Retry – When an outside number is dialled and a busy signal is
received, the auto retry feature can be used to reserve the outside line and
automatically redial the number for a programmable number of attempts.
• Last Number – The most recently dialled number on a C.O. line is saved
and may be redialled by pressing the redial key or dialling the LNR access
code.
• Save Number – Any number dialled on a C.O. line may be saved for redial
at a later time.
Ring Modes
Each keyset user can select one of three distinct ways to receive intercom calls.
The phone can automatically answer on the speakerphone, voice announce
through the speaker or receive ringing. When the ring mode is selected, keyset
users can choose one of eight distinct ring tones. Forced Auto Answer is