Specifications

SAMSUNG General Description
DCS-816 February, 1999
4 - 12
l Automatic
Automatic night service allows the system to automatically go in and out of
night service according to the system clock. There are separate time
options available for each day of the week. Auto night time is operated for
trunks that have no night group (see below).
l Manual
The operator presses the NIGHT key and then dials a passcode to change
day mode to night mode operation.
l Holiday
There are 60 holiday tables. If it is a holiday, DCS-816 operates on night
mode.
Operator Group
The station groups can contain 16 stations to answer incoming calls. Calls to
this group can be set for distributed, sequential or unconditional ringing.
Operators can use the In/Out of Group feature to meet flexible operator
requirements. Default operator group is 500, but this can be changed to
501~509.
Orbit Parking
Park Slots enable SLT users to park a call into a number. They can announce
the number to another user and that person can dial the Park Slot number to
retrieve the call. This feature is handy for those people on SLT.
Overflow
l Operator
When calls ringing an operator group go unanswered, they can overflow to
another destination after a programmed period of time. The operator group
has its own timer. The overflow destination can be a station or station
group.
l Station Group
When calls ringing a station group go unanswered, they can overflow to
another destination after a programmed period of time. Each station group
has its own timer. The overflow destination can be a station or station
group.
Paging
System software allows for the use of four internal and one external paging
zones. Stations can page any individual zone, all internal zones or all zones
simultaneously. Using system programming, each station may be allowed or
denied the ability to make and/or receive page announcement to/from any zone
or combination of zones.
Power Failure Transfer (216 Base KSU Only)
If power fails and a 8TRK card is installed, these relays can be used to reroute
the pre-assigned two C.O. lines on the card to SLTs (station 15 and 16). Which
C.O. lines are to be transferred must be decided by the installer. When power is
restored to the system, the lines and stations return to normal operation and
calls in progress will be disconnected.