User Manual

7
English
FrançaisDeutschEspañolPortuguese Italiano
Plug and Play
Our adoption of the new VESA
®
Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification data (EDID) using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the flat panel display. If your PC system
needs a video driver, follow the instructions given below according to the operating system
your computer uses.
Installing the Video Driver
Accompanied CD has necessary drivers for installing your monitor. For the driver installation,
please refer to the driver installation instructions included with CD.
D
MIC OUT jack
Connect a cable here to send sound from the
internal microphone to the computer’s sound
card.
E
AUDIO IN jack
Connect a cable here to bring sound from your
computer’s sound card.
F
External
microphone jack
Connect an external microphone here. Using an
external microphone automatically disconnects
the monitor’s internal microphone.
G
Headphone jack
Connect headphones here. Connecting
headphones automatically turns the speakers off.
Table 1. Connector locations for multimedia bases (
Continued )
Item Name Description
Setting up Your Monitor
570P body.fm Page 7 Monday, January 17, 2000 10:34 AM