LCD TV user manual imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register Model Serial No.
Important Warranty Information Regarding Television Format Viewing Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
English Contents GENERAL INFORMATION PC DISPLAY List of Features............................................................................. 2 Accessories ................................................................................. Viewing the Control Panel ........................................................... 3 Viewing the Connection Panel .................................................... 4 Remote Control ......................................................................
General Information List of Features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed. HDMI/DVI connection of your PC to this TV. Excellent Picture Quality SRS TruSurround XT - SRS TruSurround XT provides a virtual surround system.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Side Panel buttons 1 2 3 4 5 6 8 8 7 The product color and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, AV, S-Video, Component, PC, HDMI).
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~12. The product color and shape may vary depending on the model. 1 AUDIO OUT Connects to the audio input jacks on your Amplifier/ Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “ ” and “3”. 5 (MUTE) Press to temporarily cut off the sound. @ MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. ANT IN This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable between the HDMI/DVI IN jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable TV Rear Panel between the COMPONENT DVD Player or Cable Box / IN [Y, PB, PR] jacks on the TV Satellite receiver (Set-Top Box) and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). 2.
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. ANT IN 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. 1. Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
Connecting a PC Using the D-Sub Cable 1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. TV Rear Panel PC 2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 1. Connect a HDMI/DVI cable between the HDMI/DVI IN jack on the TV and the PC output jack on your computer. 2. Connect a 3.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature Plug & Play When the TV is initially powered on, basic settings proceed automatically and subsequently. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while “Plug & Play” is running. The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 1.
Auto PlugProgram & Play Auto Program is completed. 75 Channels are memorized. DTV Air : 24 Air : 1 DTV Cable : 17 Cable : 33 OK Enter 6. Press the ENTER button. Press the or button to select “Auto”, then Press the ENTER The message “Set to daylight saving time.” is displayed. button. Set the Clock Mode. Clock Mode If you select “Manual”, “Enter the current date and time.” is displayed. (See page 37) : Auto Manual Move 7.
Using the The Button button is used to select stations that broadcast a digital signal. 1. For example, for Channel 7-1, press 7, then , then 1. HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. For quick channel change, press the number buttons, then press the ENTER button. Using the PRE CH Button to select the Previous Channel 1. Press the PRE CH button. The TV will switch to the last channel viewed.
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The “Tools” menu will appear. Tools 2. Press the or button to select a menu. Picture Mode Sound Mode Sleep Timer Add to Favorite Switch to Air 3. Press the / / / /ENTER buttons to display, change, or use the selected items.
Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the or button to select “Channel”, then press the ENTER button. 2. Press the or button to select "Auto Program", then press the ENTER TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. Move 3. Press the or button to select the antenna connection, then press the ENTER button.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1. Press the MENU button to display the menu. Press the or button to select “Input”, then press the ENTER TV Input Source List Edit Name : TV button. button to select "Source List". 2. Press the ENTER Press the or button to select signal source, then press the ENTER button.
Picture Control Changing the Picture Standard You can activate either Dynamic, Standard, Movie by making a selection from the menu. 1. Press the MENU button to display the menu. button, to select “Picture”. Press the ENTER TV Picture Mode Backlight Contrast Brightness Sharpness Color Tint G 50 More : Standard Move button to select "Mode". 2. Press the ENTER Press the or button to select the “Dynamic”, “Standard” or “Movie”.
Con guring Picture Options Activating Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2. Press the or button to select "Picture Options", then press the ENTER button. TV Picture More Picture Options Reset Press the or button to select a particular item. Press the ENTER button. When you are satisfied with your setting, press the ENTER button.
° Temporary image retention may occur when viewing a static image on the set for more than two hours. TV Size Wide 16 : 9 Zoom1 Zoom2 Wide Fit 4:3 Just Scan ° After selecting “Zoom1”, “Zoom2” or “Wide Fit”: Press the or button to select “Position”, then press the ENTER button. Press the or button to move the picture up and down. Reset: Press the or button to select “Reset”, then press the ENTER button. You can initialize the setting.
Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. TV 1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 20) 2. Press the or button to select "Digital NR", then press the ENTER Picture Options Color Tone : Normal Size : Wide Digital NR : Auto HDMI Black Level : Normal Film Mode : Off button. 3.
Resetting the Picture Settings to the Factory Defaults 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. TV 2. Press the or button to select "Reset", then press the ENTER button. Press the or button to select “OK” or “Cancel” then press the ENTER button. Picture More Picture Options Reset : OK OK Cancel Press the EXIT button to exit. Each mode can be reset.
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER TV button. 2. Press the ENTER button to select "Mode". Press the or button to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. TV Sound Press the or button to select "Sound", then press the ENTER button.
Choosing a Multi-Channel Sound (MTS) track - Analog Multi-Track Sound TV 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER Multi-Track Options Preferred Language Multi-Track Sound button. : English : Stereo 2. Press the or button to select "Multi-Track Options", then press the button. ENTER Enter 3. Press the or button to select “Multi-Track Sound”, then press the ENTER button.
Setting the TV Speakers On/Off Sound output from the TV speakers is muted. 1. Press the MENU button to display the menu. Press the or button to select "Sound", then press the ENTER TV button. 2. Press the or button to select "TV Speaker", then press the ENTER Sound Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off TV Speaker : On button. Move TV 3. Press the or button to select “Off”, then press the ENTER button. Press the EXIT button to exit.
Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to lter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. 2. Press the or button to select "Clear Scrambled Channel", then press the button. ENTER It searches scrambled channels, which are to be removed from the list.
Adding and Erasing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, rst run “Auto Program” (see page 17). 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER TV Channel Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. 2.
To Set-Up Your Favorite Channels You can set channels you watch frequently as favorites. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. TV Channel Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength 2. Press the or button to select "Channel List", then press the ENTER button. Move 3.
Viewing the Channel Lists You can display a list of all channels, added channels or your favorite channels. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER TV Channel Antenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. 2. Press the or button to select "Channel List", then press the button. ENTER Move TV 3.
Labeling Channels Channels can be labeled so that their call letters appear whenever the channel is selected. 1. Press the MENU button to display the menu. Press the or button to select “Channel”, then press the ENTER button. Press the or button to select “Name”, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength Move 2.
Fine Tuning Analog Channels Use ne tuning to manually adjust a particular channel for optimal reception. 1. Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER 2. Press the or button to select "Fine Tune", then press the ENTER TV button. Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength button. Move 3. Press the or button to adjust the fine tuning.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically ne-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu.
Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV screen. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER Press the or button to select "Screen", then press the ENTER 2. Press the or button to select "Position", then press the ENTER PC button. button. Screen Image Lock Position Image Reset Resolution : 1360x768 @60Hz button. Move 3.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button.
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER TV Setup Plug & Play Language button. button. : English Time V-Chip Caption Melody : Medium Energy Saving : Off SW Upgrade Move 2. Press the ENTER button to select "Clock".
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button. 2. Press the or button to select "Sleep Timer", then press the ENTER 3.
Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER Press the or button to select "Time", then press the ENTER button. button. TV Time 1/ 1/2008 12 : 00 am 2. Three different On/Off Timer Settings can be made. Press the or button to button.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. “V-Chip” function is not available in HDMI, component or PC mode. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while setting up the “V-Chip”. U.S.A Only This product is covered by the following U.S.
How to Enable/Disable the V-Chip 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER TV button. Setup Plug & Play Language 2. Press the or button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. : English Time V-Chip Caption Melody : Medium Energy Saving : Off SW Upgrade Move TV Enter Return V-Chip Enter PIN * * * m..v Enter PIN 3.
3. The “V-Chip” screen will appear. Press the or button to select “TV Parental button. Guidelines”, then press the ENTER TV V-Chip V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move 4. The “TV Parental Guidelines” screen will appear.
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER 2.
How to Set up Restrictions Using the ‘Canadian English’ 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER 2. Press the or button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. TV Setup Plug & Play button.
How to Set up Restrictions Using the ‘Canadian French’ 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER 2. Press the or button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. button. TV Setup Plug & Play button.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER 2. Press the or button to select “V-Chip”, then press the ENTER The message “Enter PIN” will appear. Enter your 4 digit PIN number. TV Setup Plug & Play button. Language : English Time V-Chip button.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER TV button. 2.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the or button to select “Setup”, then press the ENTER button. 2. Press the or button to select “Caption”, then press the ENTER button to select “Caption”. 3. Press the ENTER Press the or button to select “On”, then press the ENTER TV Caption Caption button. Caption Mode : Off Off On : Default Caption Options button.
Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Off. 1. Press the MENU button to display the menu. Press the or button to select "Setup", then press the ENTER button. 2. Press the or button to select "Melody", then press the ENTER TV Setup Plug & Play Language : English Time V-Chip button. Caption Melody : Medium Energy Saving : Off SW Upgrade Move 3.
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV. 1. Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV. TV Rear Panel USB Drive 2. Press the MENU button to display the menu.
Appendix Troubleshooting If the TV seems to have a problem, rst try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections.
Problem Possible Solution Horizontal bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Vertical bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Screen is black and power indicator light blinks steadily. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard.
How to Adjust the Stand (LN19A450C1D, LN19A451C1D) Button (1) 1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1). - Align the TV bottom along the table edge. 2. Press on the center of the TV back. Adjust the stand as in Figure (2) while pressing the button on the back of the stand. 3. Place the TV on the table so that the TV sits safely on the table. (2) How to Adjust the Angle of the TV (LN19A450C1D, LN19A451C1D) ( 1 ) Angle adjustment when using the TV on its stand.
Installing the Stand 2 1 1. Connect your LCD TV and the stand. ° Two or more people should carry the TV. ° Make sure to distinguish between the front and back of the stand when assembling them. ° To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV. 2. Fasten two screws at position 1 and then fasten two screw at position 2. ° Stand the product up and fasten the screws.
Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the oor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inches VESA Spec.
Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically x the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately.
Speci cations Model Name Screen Size (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With Stand Without stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) LN19A450C1D, LN19A451C1D LN22A450C1D, LN22A451C1D 19 inches 22 inches 1440 x 900 @ 60 Hz 1680 x 1050 @ 60 Hz 3W x 2 3W x 2 18.8 X 2.3 X 13.7 inches (477.1 X 57.5 X 348.6 mm) 18.8 X 7.1 X 15.2 inches (477.1 X 180.
This page is intentionally left blank.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com Address Samsung Electronics Canada Inc.
LN19A450C1D/LN19A451C1D/ LN22A450C1D/LN22A451C1D 1-800-SAMSUNG (7267864) Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Call center hours of operation (Mon-Sun 9AM-12AM EST). To register this product please visit www.samsung.com/global/register.
Remote Control See “Remote Control” in the owner’s instructions for details. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “ ” and “3”. 5 (MUTE) Press to temporarily cut off the sound. @ MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
Connections Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI 1 DVD Player or Cable Box/ Satellite receiver (Set-Top Box) TV Rear Panel Connect an HDMI Cable between the HDMI/DVI IN jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). What is HDMI? • HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables DVD Player or Cable Box / Satellite receiver (Set-Top Box) TV Rear Panel 1 2 1 Component Cable (Not supplied) 2 Audio Cable (Not supplied) Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a VCR Video Connection TV Rear Panel VCR Rear Panel 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3 4 5 Audio Cable (Not supplied) 4 Video Cable (Not supplied) 3 RF Cable (Not supplied) 5 Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape. ° Each VCR has a different back panel configuration.
Connecting a Digital Audio System 1 TV Rear Panel Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. Digital Audio System When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control. 1 ° 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Connecting a PC Using the D-Sub Cable TV Rear Panel 1 2 Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Turning the TV On and Off 5 Press the POWER button on the remote control. You can also use the POWER button on the TV. The TV begins memorizing all available stations. After all the available channels are stored, it start to remove scrambled channels. Press the EXIT button to exit. Auto PlugProgram & Play Auto Program in Progress. Viewing the Menus DTV Cable : -- Cable : 11 Cable 24 11 % Stop Enter Return Auto PlugProgram & Play 1 2 With the power on, press the MENU button.
Setting the Channel List Picture Mode Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, first run “Auto Program”. 1 2 3 4 Press the MENU button. Press the or button to select “Channel”, then press the ENTER button. Press the or button to select “Channel List”, then press the ENTER button. Press the ENTER Customizing the Picture Settings button to select “All”.
To Select the Source TV Source List TV AV S-Video Component PC HDMI Move : ---: ---: ---: ---: ---- Enter Return Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch. ° Available signal sources: TV, AV, S-Video, Component, PC, HDMI. ° You can choose only those external devices that are connected to the TV.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. / Adjust the antenna. / Check all wire connections. Poor sound quality. Try another channel. / Adjust the antenna. No picture or sound. Try another channel. / Press the SOURCE button. / Make sure the TV is plugged in. / Check the antenna connections.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com Address Samsung Electronics Canada Inc.
Warning:! Important~SafetY ~ln~t;9ctions~ '"': - , -~-; -' ,,- (Please'read tlleapprQpriate section thatcorte$pond~ t~ tne 'marking ~n"yol!r';Samsuifg~prodtict before attempting to instaiithe product.) , , , ~ , This symbol indicates that high voltage is prcsent inside, It is dangerous to makc any kind of contact with any internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
II Avertissement! Consignes de securite importantes II Advertencia! Instrucciones importantes de seguridad (Avant toute installation de votre prod uit Samsung, veuilJez lire les sections correspondant aux inscriptions qui figurent sur ce de mier.) (Lea la secci6n apropiada que corresponde a la marca del producto Samsung antes de intentar instalar el producto.) ATTENTION Ce symbole indiquC' qu'une tension etcvee est presente a I'interieur de I'appareil.
I Aviso! Instru~oes de seguran~a importantes Regulatory Compliance Statements (Leia a sec~ao adequada que corresponde a marca no produto Samsung antes de tentar instalar 0 produto.) Your Samsung product is marked to indicate its compliance class . . Estc simbolo indica a existencia de alta ten sao 110 interior do televisor. Eperigoso qualquer parte no inlerior do produlO . ATENC;Ao CUIDADO:PARA REDUZIR 0 RISCO DE CHOQUE ELEen,leO.
Important Safety Instructions(UL Only) ICES-003 Class A Notice - Avis NMB·003, Classe A I) 2) 3) 4) 5) 6) 7) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la c1asse A est conforme la norme NMB-003 du Canada. a ICES·003 Class B Notice· Avis NMB·003, Classe B This Class B digital apparatus complies with Canadian ICES-003. Cet apparell numerique de la c1asse Best conforme a la norme NMB-003 du Canada.
Printed in Mexico AA68-03242L-01
SAMSUNG COLOR TELEVISION & PROJECTION TELEVISION LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: Color Television: One (1) Year Parts and Labor, except Two (2) Years Parts Warranty for Picture Tube (CRT)* only on Analog Color Televisions Projection Television
IMPORTANT WARRANTY INFORMATION REGARDING TELEVISION FORMAT VIEWING Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 43 ratio format and constantly moving.
