Specifications

SAMSUNG Proprietary-Contents may change without notice
6-9
Circuit Description
6-6 Test Command Table
Command No. Command SW Name Description
(OP, AB, RB)
01(1F, 0, 0) T_SUSPEND_I Terminate the normal mode, enter to the test mode.
02(3f, 0, 0) T_RESTART_I Terminate the test mode, enter to the normal mode.
03(FD, 0, 0) T_SAVE_VAL_I Save value in EEPROM. (Only for Auto test)
04(1D, 0, 1) T_GET_MODE_I Get mode. (CDMA or AMPS)
05(1C, 1, 0) T_SET_MODE I Set mode to CDMA or AMPS. (Only for Auto test)
06(1E, 0, 0) T_WRITE_NV_I Write an EEPROM item. (one of the NV items)
07(81, 0, 0) T_CARRIERON_I Turn the carrier on.
08(82, 0, 0) T_CARRIEROFF_I Turn the carrier off.
09(83, 4, 0) T_LOADSYN_I
2)
Set the synthesizer to the channel specified by ch_ data.
10(84, 1, 0) T_PWRLEVEL_I
2)
Set the RF power attenuation to the specified value.
11(85, 0, 0) T_RXMUTE_I Mute the receive-audio signal.
12(86, 0, 0) T_RXUNMUTE_I Unmute the receive-audio signal.
13(87, 0, 0) T_TXMUTE_I Mute the transmit-audio signal.
14(88, 0, 0) T_TXUNMUTE_I Unmute the transmit-audio signal.
16(8F, 0, 0) T_STON_I Transmit a continuous Signaling Tone (ST).
17(90, 0, 0) T_STOFF_I Stop transmit a continuous Signaling Tone (ST).
20(94, 4, 0) T_TEST_SYS_I Roam Test System
22(91,96,96) T_SNDNAM_I
1)
Display and send NAM information.
23(95, 3, 4) T_SNDVERSION_I
1)
Display and return S/W version.
24(9F, 7, 8) T_SNDESN_I
1)
Display and return ESN.
25(92, 0, 0) T_BACKLIGHT_ON_I Turn on the backlight.
26(93, 0, 0) T_BACKLIGHT_OFF_I Turn off the backlight.
27(96, 0, 0) T_LAMP_ON_I Turn on the LAMP.
28(97, 0, 0) T_LAMP_OFF_I Turn off the LAMP.
30(9D,16, 0) T_PLINE_I Display and return production date.
32(A0, 1, 0) T_SATON_I*
2)
Enable the transmission of SAT.
33(A1, 0, 0) T_SATOFF_I* Disable the transmission of SAT.
34(A2, 0, 0) T_CDATA_I Transmit continuous 5-word Reverse CTL CH message.
35(A3, 0, 0) T_VOLUME_UP_I Increase value of the last command. (Only for autotest)
36(A4, 0, 0) T_VOLUME_DOWN_I Decrease value of the last command. (Only for autotest)
42(AA, 1, 0) T_DTMFON_I
2)
Activate DTMF generator with keycode.
To change the phone from normal mode to test mode, you should enter the following keys. :
Press [4 7 * 8 6 9 # 1 2 3 5]