Data Sheet

SAMSUNG SDI Confidential Proprietary
Spec. No. INR18650-29E Version No. 1.0
7
9.3 Forced discharge test
Test method: A discharged cell is subjected to a reverse charge at 1.0C(2,750mA)
for 90 min.
Criteria: No fire, and no explosion.
Forced discharge test shall be performed with the IEC62133 standard
9.4 Heating test
Test method: To heat up the standard charged cell at heating rate 5℃ per minute up to
130℃ and keep the cell in oven for 1 hour.
Criteria: No fire, and no explosion.
10. Warranty
Samsung SDI will be responsible for replacing the cell against defects or poor workmanship
for fifteen(15) from the date of shipping. Any other problems caused by malfunction of the
equipment or unsuitable use of the cell are not under this warranty.
The warranty set forth in proper use, handling conditions described above,
and excludes in the case of a defect which is not related to manufacturing of the cell.
11. Others
11.1 Storage for a long time
If the cell is kept for a long time (3months or more), It is strongly recommended
that the cell is preserved at dry and low-temperature.
11.2 Other
Any matters that specifications does not have, should be conferred with
between the both parties.