Data Sheet

SAMSUNG SDI Confidential Proprietary
Spec. No. INR18650-29E Version No. 1.0
17
▣ Pack Design Guideline (For mechanical design)
Portable IT
Power-Tool Medical E-Bike E-Scooter EV/LEV ESS/UPS
◎ ◎ ◎ ◎ ◎ ◎ ◎
◎ ◎ ◎
◎ ◎ ◎
◎ ◎ ◎ ◎ ◎ ◎ ◎
◎ ◎
◎ ◎
Item
□ Need partitions(separator) between
BMS and a Cell
□ Need to check if the pack is designed
to be able to avoid thermal runaway
(1KWh↑)
□ Need to analyze the battery pack's
thermal distribution and its effect
on the pack's life cycle
□ Need to use a non-flammable
(VO level) case
□ Need to apply improved material
(Steel) to the case
□ Need to analyze the battery pack's
structure, system, installation status
and use environment
If a customer’s battery pack cannot meet the requirements above,
SDI cannot take responsibility for a quality issue about a battery cell.