Service manual

Rev. 2.00

- 92 -

SRP-275

5-2-6 Main-assembly E (for SMP715C type)

Part name Assembly procedure

① Frame-rotator ass’y

② Shaft-pivot -2ea.

③ Spring-rear open

④ Ring-e hole (ø5.0) -2ea.

⑤ Auto cutter ass’y

⑥ Screw-taptite (M3×5)

1. Attach ① Frame-rotator ass’y on Frame-main and then insert two

② Shaft-pivot and two ③ Spring-rear open. And assemble two

④ Ring-e hole (ø5.0) to two ② Shaft-pivot.

2. Tighten ⑤ Auto cutter ass’y on ① Frame-rotator ass’y with ⑥

Screw-taptite (M3×5).

3. Grease two Shaft-locking, the hooks of Frame-clamshell locking

and the groove of Frame-pivot locking-L/R.