Service manual

Rev. 2.00

- 89 -

SRP-275

5-2-3 Main-assembly C

Part name Assembly procedure

① Frame basket ass’y

② Screw-taptite (M3×6) -2ea.

③ Shaft-head_guide

④ Lever-ad -2ea.

⑤ Shaft-head carriage

⑥ Ring-e hole (ø3.0)

⑦ Printer-head

⑧ Screw-tapping (M3×10) -2ea.

⑨ Bracket-head-cover-L

⑩ Bracket-head-cover-R

⑪

Screw-taptite (M2.6×3) -2ea.

1. Tighten ① Frame basket ass’y on Frame-main with two ②

Screw-taptite (M3×6).

2. Insert Carriage head ass’y to ③ Shaft-head_guide and then

insert ③ Shaft-head_guide into two holes of Frame-main.

Insert two

④

Lever-ad

to the end of

③

Shaft-head_guide

and then rotate

two

④

Lever-ad

downward. And oil

③

Shaft-head_guide

with G948P.

4. Insert ⑤ Shaft-head carriage in two holes the Frame-main and

then assemble ⑥ Ring-e hole (ø3.0) to ⑤ Shaft-Head carriage.

5. Insert FPC-head in ⑦ Printer-head and then tighten ⑦ Printer-

head on Carriage head ass’y with two ⑧ Screw-tapping

(M3×10). And grease ⑤ Shaft-head carriage and the triangle part

of Carriage head ass’y.

6. Tighten ⑨ Bracket-head-cover-L and ⑩ Bracket-head-cover-R

on Frame-main with each of ⑪

Screw-machine (M2.6×3)