Service manual

Rev. 2.00

- 82 -

SRP-275

5-1-8 Frame basket-C assy

Part name Assembly procedure

① Frame basket

② Roller holder -2ea.

③ Shaft-roller holder

④ Spring-roller holder -2ea.

⑤ Platen paper guide

⑥ Frame-holder basket-L ass’y

(Sub-assembly 5-1-9)

⑦ Frame-holder basket-R ass’y

(Sub-assembly 5-1-11)

⑧ Cutter lower ass’y

(Sub-assembly 5-1-13)

⑨ Harness (Jumper cable)

⑩ Screw-taptite (M3×6) -4ea.

⑪ Screw-taptite (M3×4) -2ea.

1. Tighten ⑥ Frame-holder basket-L ass’y to ① Frame basket with

two ⑩ Screw-taptite (M3×6).

2. Tighten ⑨ Harness (Jumper cable) and ⑦

Frame-holder

basket-R ass’y to ① Frame basket with two ⑩ Screw-taptite

(M3×6).

3. Insert two ② Roller holder to ③ Shaft-roller holder and then

assemble two ④ Spring-roller holder to ③ Shaft-roller holder,

⑥ Frame-holder basket-L ass’y and ⑦ Frame-holder basket-R

ass’y.

4. Insert ⑤ Platen paper guide in ① Frame basket.

5. Tighten ⑧ Cutter lower ass’y to ⑥ Frame-holder basket-L

ass’y and ⑦ Frame-holder basket-R ass’y with two ⑪ Screw-

taptite (M3×4).