Service manual

Rev. 2.00
- 105 -
SRP-275
5-5-2 Main-assembly A (for SRP-275C type)
Part name Assembly procedure
① SMP715C printer mechanism ass’y
Rubber② -damper
Cover base③
Screw④ -taptite (M3×12) -4ea.
1. Insert four Rubber② -damper to a half circle groove of ①
SMP715C printer mechanism ass’y.
2. Tighten ① SMP715C printer mechanism ass’y on the boss of ③
Cover base with four Screw④ -taptite (M3×12).
3. Insert Harness-AC and Harness-jumper cable to a square hole of
Cover base③ .
2
3
1
2
2
2
4
4
4
4
Harness-jumper cable
Harness-AC