Service manual

Rev. 2.00
- 100 -
SRP-275
5-4-5 Switch-cover open assy
Part name Assembly procedure
PCB① -switch-cover open
Switch② -micro (5.9gf)
Harness③ -switch-cover open
1. Insert Sw② itch-micro (5.9gf) to PCB① -Switch-cover open.
2. Solder the land on PCB① -Switch-cover open bottom side and
attach Harness③ -Switch-cover open on the land.
<Check point>
After soldering, check the frozen lead and short.
1
2
3
5-4-6 Switch-paper near end -W assy
Part name Assembly procedure
① PCB-switch-paper near end-W
Switch② -micro (5.9gf)
③
Harness-switch-paper near end
1.
Insert Switch ② -micro (5.9gf) to PCB ① -Switch-paper near end-W .
2. Solder the land on PCB① -Switch-paper near end-W bottom side
and attach Harness③ -Switch-paper near end-W on the land.
<Check point>
After soldering, check the frozen lead and short.
2
1
3