Datasheet
Table Of Contents
- LCD Monitor
- Safety Instructions
- Introduction
- Connections
- Using the Software
- Adjusting the Monitor
- Troubleshooting
- Self-Test Feature Check
- Check List
- No images on the screen. I cannot turn on the monitor.
- I cannot see the On Screen Display.
- The screen shows strange colors or just black and white.
- The screen suddenly has become unbalanced.
- The screen is out of focus or OSD cannot be adjusted.
- LED is blinking but no images on the screen.
- There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.
- There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".
- USB Monitor Check List
- There is no image on the screen. I cannot turn on the monitor.
- The screen of the USB monitor freezes.
- My USB monitor is connected but the screen is blank.
- My computer is on and the LED is blinking. However, only a blank screen is displayed on the monitor.
- Check the following items if there is trouble with the monitor.
- Q & A
- Specifications
- Information
- Appendix
Note
Cleaning Cloth is only provided for highly polished black products as a product feature.
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It
can
be displayed up to three (3) times. Make sure to adjust the resolution of your PC before
reaching the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Front
MENU button [MENU/ ]
Introduction