User manual

1
9
AJA HDP4 HD-SDI/SDI to DVI-D and Audio Converter User Manual — Installation
Installation
Typically, HDP4 installation consists of the following steps:
1. Ensure the HDP4 is disconnected from power.
2. Configure the DIP switch for the desired configuration and video scaling.
3. Connect video equipment to the convertor BNCs and DVI connector.
4. Connect audio equipment to RCA connectors (optional)
5. Apply AC power to the converter.
Specifications
Item Specification
Inputs SMPTE-259/292/296 SDI/HD-SDI
Input Formats 1080i, 1080p, 720p, 525i, 625i
Video Input HD-SDI/SDI, SMPTE-259/292/296/274
Outputs 4 DVI-D (E-DDC and E-EDID compatible)
4 Sets of Stereo Audio (RCA-style outputs) @ -10dBV
nominal
2 Looping SDI outputs of the SDI inputs
Supported Output Displays
(native resolution)
Note: for resolutions not listed
here, the HDP4 defaults to
1024 x 768
640 x 480 — VGA
800 x 600 — SVGA
848 x 480 — Plasma
852 x 480 — Plasma
1024 x 600 — WSVGA
1024 x 768 — XGA
1280 x 720 — HDTV
1280 x 768 — WXGA
1280 x 960 — 4:3 SXGA
1280 x 1024 — SXGA
1360 x 768 — Plasma
1366 x 768 — Plasma
1600 x 1024 — WSXGA
1600 x 1200 — UXGA
1680 x 1050 — Apple 20” Cinema HD
1920 x 1200 — WUXGA
Maximum DVI resolution 1920 x 1200 @ 60Hz
Size 5.25” x 10.5” x 1.75” (133 x 266 x 44mm)
Power 100/240 VAC, 8 Watt, power cord provided