Specifications

e-STUDIO162/162D/151/151D TEST COMMAND, TROUBLE CODES 10 - 13
26 02 (R)ADF setting (ADF/RADF)
(Executable only when the
ADF/RADF is installed.)
[Function]
When this test command is executed, the current set ADF is displayed. Enter the code number corre-
sponding to the desired ADF and press [OK (ENTER)/START] key to save the setting.
[Operation]
The operation is similar to test command 21-01.
03 Second cassette setting
(2ND TRAY)
[Function]
When this test command is executed, the current set second cassette is displayed. Enter the code
number corresponding to the desired second cassette and press [OK (ENTER)/START] key to save
the setting.
[Operation]
The operation is similar to test command 21-01.
04 Main unit duplex setting
(DPLX) (Executable only
when the RADF is installed.)
[Function]
When this test command is executed, the current set duplex is displayed. Enter the code number cor-
responding to the desired duplex and press [OK (ENTER)/START] key to save the setting.
[Operation]
The operation is similar to test command 21-01.
06 Destination setting
(DESTINATION)
[Function]
When this test command is executed, the current set destination is displayed. Enter the code number
corresponding to the desired destination and press [OK (ENTER)/START] key to save the setting.
∗
For AB series, there is no schedule for production.
[Operation]
The operation is similar to test command 21-01.
07 Machine conditions check
(CPM)
[Function]
When this test command is executed, the current machine setting is displayed.
[Operation]
20 Rear edge void setting (END
EDGE)
[Function]
When this test command is executed, the current set rear edge void is displayed. Enter the code num-
ber corresponding to the desired rear edge void and press [OK (ENTER)/START] key to save the set-
ting.
[Operation]
The operation is similar to test command 21-01.
Main
code
Sub
code
Contents Details of function/operation
Code number ADF Display item
0 ADF NO ADF OFF
1ADF YES ADF ON
2 RADF YES RADF ON
Code number Second cassette Display item
0 Second cassette NO OFF
1 Second cassette YES ON
Code number Duplex Display item
0 Duplex NO OFF
1 Duplex YES ON
Code number Destination Display item
0 Inch series INCH
1AB series AB
2AB series –
CPM Coy quantity Remark
10 CPM 10
12 CPM 12
13 CPM 13
14 CPM 14
15 CPM 15
16 CPM 16
1) The machine setting is displayed.
26-07 CPM
10 CPM
Code number Setting Display item Remark
0 Rear edge void NO OFF
1 Rear edge void YES ON Default
e-STUDIO162_151.book 13 ページ ２００４年１２月２日 木曜日 午後９時３７分