User Manual

25
English
Specifications
Table 7. Technical and environmental specifications
Analog Input Digital Input
Panel Size
Display Size
Type
Pixel pitch
Viewing Angle
15.0” Diagonal
304.1 (H) x 228.1 (V) mm
a-si TFT active matrix
0.297 (H) x 0.297 (V) mm
60/60/55/55 (L/R/U/D): Typical
(Depending on the panel manufacturer, the viewing
angle may be different from this spec.)
*Frequency Horizontal
Vertical
Display color
30 ~ 61 kHz
50 ~ 75 Hz
16,003,008 colors
30 ~ 48.3 kHz
50 ~ 60 Hz
16,003,008 colors
Display
Resolution
Optimum Mode
Maximum Mode
1024 x 768 @ 60 Hz
1024 x 768 @ 75 Hz 1024 x 768 @ 60Hz
Input Signal Sync
Video signal
H/V Separate, TTL, P.orN.
H/V Composite, TTL, P.orN.
Sync-on-green 0.3 Vp-p, N.
0.7 Vp-p @ 75 ohm, P.
TMDS
Power Supply AC 90 ~ 264 Volt, 60 Hz / 50Hz to 12V/3A
Power
Consumption
Normal
Power Saving
25 Watt
Less than 5 W
Dimensions /
Unit Weight
Unit (WxHxD) with:
Simple base: 385.4 x 364.7 x 173.0 mm / 5.55Kg
MultiMedia base: 385.4 x 406.2 x 179.0 mm / 6.30Kg
Pivot MM base: 385.4 x 406.2 x 179.0 mm / 6.30Kg
Angle-Pivot base: 385.4 x 431.6 x 178.9 mm / 6.95Kg
Wire-frame base: 385.4 x 339.2 x 99.7 mm / 4.75Kg
Environmental
Considerations
Operating Temperature: 50 ˚F to 104 ˚F (10 ˚C to 40 ˚C)
Operating Humidity: 10% to 80%
Storage Temperature: 13 ˚F to 113 ˚F (-25 ˚C to 45 ˚C)
Storage Humidity:5% to 95%
Audio
Characteristics
(Available with
Multimedia
bases only)
Built-in Mic: High Sensitivity Condenser Mic. (mono)
Audio Input: L/R Stereo Phone Jack, 0.5 Vrms
Sound Output: 1.0 W (L) + 1.0 W (R)/THD 1% at 8 ohm
Frequency Response: 80 Hz ~ 20 KHz (at -3dB)
Headphone: Max 50 mW output (3.5 – pi jack)
* Referring to Preset timing modes, page 28.
Appendix
150T-3p Page 25 Tuesday, January 9, 2001 3:59 PM