User manual

PNY Quadro User Manual page 2
Before You Begin
• Before installing the Display driver, make sure your Windows® /2000/ XP or NT was installed in
VGA mode and functions properly.
• To use an AGP graphics card with Windows® NT4.0, you may need to re-install NT with Service
Pack 5 (SP5) or Service Pack 6 (SP6) before installing the AGP card.
• If you are running Windows® NT4.0, please note that some drivers are not compatible with earlier
releases of Windows® NT. Consult your dealer or local support to ensure you have the most recent
releases for Windows NT and the drivers.
IMPORTANT
Uninstalling Your Existing VGA Driver
• Remove your existing Display Driver using the Add/Remove Icon in ‘Control Panel’
• Shut down your computer.
• Remove your existing video card
• NOTE: If your system (motherboard) has an onboard graphics controller, please contact the system
vendor on how to properly disable it.