Specifications

-SAMSUNG SDI Confidential Proprietary –
Model INR18650-15L Version No. 3.21 Sang-Uck Kim
- 10/17 -
6.6.2 Cell Voltage monitoring system.
The system (Charger or Pack) should equip with a device to monitor each
voltage of cell block and to stop charging if the cell imbalance happened.
6.6.4 The battery pack or system should have warning system such as over
temperature, over voltage, over current, and so on.
7. Battery pack assembly
7.1 Prohibition of usage of damaged cell
7.1.1 The cell should be inspected visually before battery assembly.
7.1.2 The cell should not be used if sleeve-damage, can-distorsion and/or
electrolyte-smell is detected.
7.2 Terminals handling
7.2.1 Excessive force on the negative terminal should be avoided when
external lead is welled.
7.3 Transportation
7.3.1 If the cell is necessary to transported to other place, such as the
battery manufacturer, careful precautions should be taken to avoid
damage of cell.
8. Others
8.1 Disassembly
8.1.1 The cell should not be dismantled from the battery pack.
8.1.2 Internal short-circuit caused by disassembly may lead to heat generation
and/or venting.
8.1.3 When the electrolyte is coming in contact with the skin or eyes,
flush immediately with fresh water and seek medical advice.
8.2 Short-circuiting
8.2.1 Short-circuit results in very high current which leads to heat generation.
8.2.3 An appropriate circuitry should be employed to protect accidental
short-circuiting.
8.3 Incineration
8.3.1 Incinerating and disposing of the cell in fire are strictly prohibited,
because it may cause rupture and explosion.
8.4 Immersion
8.4.1 Soaking the cell in water is strictly prohibited, because it may cause
corrosion and leakage of components to be damaged to functions
8.5 Mixing use
8.5.1 Different types of cell, or same types but different cell manufacturer's shall not be
used, which may lead to cell imbalance, cell rupture or damage to system due to
the different characteristics of cell.
8.6 Battery exchange
8.6.1 Although the cell contains no environmentally hazardous component,
such as lead or cadmium, the battery shall be disposed according to
the local regulations when it is disposed.
8.6.2 The cell should be disposed with a discharged state to avoid heat generation
by an inadvertent short-circuit.
8.7 Caution
The Battery used in this device may present a risk of fire or chemical burn if
mistreated.
Do not disassemble, expose to heat above 100℃ or incinerate it.