manual

ENGLISH-34
Symptom Checklist
During product registration, the AP
password 1111122222 is not input
correctly.
fPress and hold the “[robot vacuum] Samsung” on the
network list and delete the network to initialize the
password.
During product registration, the
password of the connecting wireless
router is not input correctly.
fCancel the product registration, run the SmartThings App
again, and try the product registration again.
fPress and hold the wireless router you want to connect on
the network list, and delete the network to initialize the
password.
A connection cut between the
SmartThings App and the POWERbot
occurs though the product
registration is completed.
fRefresh the screen and wait.
fRun the SmartThings App again.
fCheck whether there is an internet connection problem.
Especially, a rewall may interrupt standard operation.
A connection cut between the
SmartThings App and the POWERbot
suddenly occurs during normal
operation of the app.
fIf the POWERbot is distant from a wireless router,
connection cut may occur.
fReset the POWERbot and the smartphone, and check the
connection again.
fIf the connection cut occurs repeatedly, try the product
registration again.
fWhen the SSID/password of a wireless router is changed,
try the product registration again.
Controlling with SmartThings App
does not work since the remote
control function is disabled.
fRemote control function is disabled status. Make the remote
control function enabled status with a remote controller.
1_VR7200_EN_DJ68-00827B-00_AA.indd 34 2019-03-19 오후 5:25:55