manual

ENGLISH-33
Symptom Checklist
The Edge Clean Master function does
not work.
fWhen POWERbot cannot recognize the wall, the Edge clean
master may not work.
– When an obstacle made of reective material is in front
of the wall
– When the wall itself is made of reective material
– When the wall is a dark color
The Edge Clean Master function works
though there is no wall or corner.
fCheck whether small obstacles are arranged in a narrow
space.
fWhen the POWERbot recognizes the front obstacle as a
wall, Edge clean master function may work.
The Edge clean master function
works though the POWERbot has not
approached a wall or corner.
fWhen the degree of the angle of a corner which the
POWERbot detects is large, the Edge clean master function
may work without approaching the wall or corner.
SmartThings App cannot be installed.
fSmartThings App operates on Android OS 6.0 or later, iOS
10 or later.
fThe supporting OS version for SmartThings App may
change later.
fFor rooted smart devices, standard installation and use will
not be guaranteed.
A message of product registration
failure appears.
fTry the product registration procedure again by referring to
the pop-up messages.
fPlease refer to the “Setting up the wireless router” in the
user manual.
fPlease refer to the steps for completing the product
registration in the user manual section "Adding a device to
the SmartThings APP".
fWhen the product registration fails repeatedly, reset the
POWERbot and Smartphone, run the SmartThings App again
and try the product registration.
fThe same Samsung account should be used for the login of
App and product registration.
fAll users should use the Samsung account issued by the
same country.
During product registration,
recharging button is pressed and
held as instructed but the next step
does not appear.
fPress the recharging button until you hear it beep.
fIf the next step does not appear within several seconds,
press the recharging button one more time.
During product registration, the
wireless router I want to connect
cannot be searched.
fCancel the product registration, run the SmartThings App
again, and try the product registration again.
1_VR7200_EN_DJ68-00827B-00_AA.indd 33 2019-03-19 오후 5:25:55