manual

ENGLISH-21
Setting time/schedule
Setting the time
You must set the current time before using the One-time/daily schedule.
Start setting Select "Hour" Select "Minute"
Select "AM/PM"Setting complete
Skip to previous,
next setting
Setting the schedule
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Start setting Select "One-time" or
"Daily" schedule
Select "Hour"
Select "Minute"Select "AM/PM"Setting complete
Skip to previous, next setting
Cancelling during setup
fSetting will be canceled automatically when there's no
input for 7seconds.
Cancelling One-time/Daily schedule
When both One-time/
Daily schedule is set
or or
Press for 3 sec. Select the schedule Cancel complete
When either one of
One-time or Daily
schedule is set
Press for 3 sec.
fYou can set the multi-time schedule and the anti-disturbance time with the SmartThings App.
fWhen the anti-disturbance time is set at the SmartThings App, you cannot set the schedule at the
body of the POWERbot within the set anti-disturbance time.
– If you want to set the schedule within the set anti-disturbance time, cancel the set anti-disturbance
time at the SmartThings App rst.
1_VR7200_EN_DJ68-00827B-00_AA.indd 21 2019-03-19 오후 5:25:40