High Resolution Day & Night Varifocal Lens Camera SCO-2080 User Guide Before installing and operating this product, please read this manual thoroughly.
Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description.
Contents Contents Features • Features………………………………………………………………… 5 • Warnings & cautions…………………………………………………… 6 • Precautions…………………………………………………………… 7 • Components and Accessories………………………………………… 9 • Overview………………………………………………………………… 9 ■ Front……………………………………………………………………………… 9… ■ Back……………………………………………………………………………… 10 • Adjust to lens…………………………………………………………… 11 ■ Adjust to Lens’s ZOOM and Focus……………………………………………… 11 • Connection……………………………………………………………… 12 ■ Connecting to monitor… ……………………………………………………… 12… ■ Co
Precautions Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Warnings & Cautions Do not install under extreme temperature conditions. Do not install in high humidity environment.
Components and Accessories Precautions Do not drop the camera or subject it to physical shock. Never keep the camera face to strong light directly. ❶ 2 3 ❹ ➎ ❻ 0 SCO-208 7 ❶ SCO-2080 2 Sunshield 4 Sunshield Adaptor (1EA) 5 Tapping Screw (3EA) 7 Installation Video Output Cable May cause a product malfunction. 3 L-type hexagon wrenches (3.0mm) ❻ User’s Manual Overview May damage the CCD. FRONT Do not expose the camera to radioactivity. 2 ❶ 3 4 5 Radioactivity exposure may damage the CCD.
Adjust to Lens Overview Adjust the lens's zoom and focus Notes • When you adjust to the ZOOM & FOCUS of the lens, Please remove the front cover from the camera, by turning the cover counterclockwise. • To adjust the zoom & focus loosen the individual levers before tightening them again. • To ensure the weatherproof integrity is maintained, ensure the front cover is tightened correctly. BACK 1. Remove the sunshield from the camera. 2.
Connection Connecting to Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to the monitor. The recommended adaptor specification for SCO-2080N/P is DC 12V/ 500mA , AC 24V / 500mA. Please check the standard power requirement before connecting the power. Recommend AC24A / 500mA adaptor for a long-distance.
Connection RS-485 communication control Using Coaxial Communications •C oaxial Communications System • OSD Control method Connecting to RS-485 Control Cable WHITE (TRX+) BLACK (TRX-) CONTROL CABLE SPEC WHITE (TRX+) RS-485+ BLCAK (TRX-) RS-485- Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. (1) Connection to a PC.
Operating Your Camera Menu Configuration Select the function using the Function Setup switch. MAIN SETUP LENS EXPOSURE WHITE BAL SSDR BACKLIGHT SSNR3 DAY/NIGHT SPECIAL EXIT ●DC ●BRIGHTNESS ●SENS-UP ●ATW ●MANUAL ●OFF ●OFF ●OFF ●COLOR ●IMAGE ADJ. ●MOTION DET ●COMM ADJ ●SAVE ●SHUTTER ●RETURN ●OUTDOOR ●AWC→SET ●ON ●BLC ●ON ●B/W ●CAM TITLE ●PRIVACY ●LANGUAGE ●NOT SAVE Menu Setup Use the Function Setup Switch whitin the camera. ●AGC ●INDOOR ●HLC ●AUTO ●SYNC ●DIS ●RETURN ●RESET MAIN SETUP 1.LENS DC 2.
Operating Your Camera - FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. Notes • When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled. Notes • If color rolling occurs when using a DC lens, set Shutter to Fixed (---). EXPOSURE MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL DC ATW 1.
Operating Your Camera ※ Select one of the following 5 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K. OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K. MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode.
Operating Your Camera HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlights, the light can mask out much of the on-screen detail. - LEVEL : Adjust level of the HLC function. - LIMIT : Enable to change the operating condition. - MASK COLOR/TONE : Change the color / transparency of the masking area.
Operating Your Camera DAY/NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’ . - BURST MODE : You can turn on or off the burst signal on B/W mode. - DURATION : You can select brightness of illumination about changing the day/night mode. - DWELL TIME : You can select the duration time about changing the day/night mode.
Operating Your Camera SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE 2. Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. 2) Set it to ‘ON’ by using the Function Setup switch. CAMERA TITLE SETUP ABCDEFGHIJKLM 3) Press the Function Setup switch. NOPQRSTUVWXYZ abcdefghijklm 4) Use the Function Setup switch to move to nopqrstuvwxyz a desired letter and select the letter by -.
Operating Your Camera PRIVACY : Mask an area you want to hide on the screen. PRIVACY AREA SETUP 1.AREA AREA1 2.MODE OFF 3.MASK COLOR GREEN 4.MASK TONE 1 5.TOP 39 6.BOTTOM 79 7.LEFT 13 8.RIGHT 52 9.RETURN 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. 2) Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA.
Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. • Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected UTP cable or BNC cable to the camera. • The image on the screen is dim. ▶ Is lens stained with dirt? Clean your lens with soft, clean cloth.
DECLARATION OF CONFORMITY 118.5mm Dimension Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name Ø77 86mm 274.7mm European Representative Address Equipment Type/Environment CCTV Camera Model Name SCO-2080P Beginning Serial NO. C5A46V3Z200001X Year of Manufacture 2010.02.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE LTD.