Operation Manual

SAM4s SPS-300 Operator's & Programming Manual v1.4 Program Mode Programming • 151
3. Press PAGE DOWN to view the second page of group programming:
GROUP #1 PROGRAMMING
RESERVED
RESERVED
RESERVED
GIFT CARD(1-2) 0
1:ACTIVATE 2:ADD
AGE VERIFICATION (0-5) 0
4. Refer to the table below to fill the fields of the GROUP PROGRAMMING
screens.
5. Press CASH to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press CLEAR to return to the PROGRAM
MODE screen.
Group Programming - Reference Information
Option Entry Description
DESC Alpha
numeric
12 character
You can program a descriptor for each group. Type the
descriptor using the Program Overlay or by using the
descriptor code method (see page 117.). The overlay is
automatically activated when the cursor is pointing at
the DESC field. The default descriptors are GROUP 1,
GROUP 2, etc.
ADD TO GROUP TOTAL Y or N
Select N if you do not wish this groups total to be
added to the total of all groups on the Group report.
SEND TO KP Y or N
Select Y if you wish to send PLUs reporting to this
group to a kitchen printer.
KP PORT # Y or N
For SAT: Select Y or N to direct items to the device
attached to port 1-4 of the server register. Use the R
option (Y or N) to print a kitchen requisition at the
register.
For SER: Select Y or N to direct items to the device
attached to port 1-4 of a satellite register. (You must
set the register number where the KP is attached at IRC
programming, see page 121.) Use the R option (Y or
N) to print a kitchen requisition at the register.
PRINT RED ON KP Y or N
Select Y if you wish items reporting to this group to
print in red on the kitchen printer. (Note, the kitchen
printer must have red/black printing capability, and this
option does not apply to the register receipt printer.)