Datasheet

ManualsBrandsSAMSUNG LED ManualsHighPower-LEDsHighPower LED Warm white 66 lm 120 ° 5.96 V 200 mA

http://www.samsungled.com

1 / 52

Rev:

Product Family Data Sheet

SAMSUNG ELECTRONICS

95,

Samsung2-Ro, Giheung-Gu,

Yongin-City, Gyeonggi-Do

446

711,

KOREA

ISSUE NO

0043800-05

NTI16

LM362A

3623

LED PKG

change without notice. SAMSUNG, is

registered trademark of SAMSUNG ELECTRONICS.

Introduction

Features



Beam Angle:

120



Precondition

JEDEC Level



Dimension

: 3.6 x 2.3 x 0.6



ESD withstand Voltage

up to

±5

[

HBM]



Reliability Test

Refer to page

Applications



INDOOR LIGHTING

Ambient Light, L-tube, Down light, LED bulbs and Ceiling Light

Summary of content (52 pages)

PAGE 1
ISSUE NO : 3800-05NTI16 Rev: 004 Product Family Data Sheet LM362A - 3623 LED PKG Introduction Features  Beam Angle: 120˚  Precondition : JEDEC Level 2a  Dimension : 3.6 x 2.3 x 0.6 mm  ESD withstand Voltage : up to ±5KV [HBM]  Reliability Test : Refer to page 25 Applications  INDOOR LIGHTING : Ambient Light, L-tube, Down light, LED bulbs and Ceiling Light SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA Copyright © 2009-2011 SAMSUNG ELECTRONICS Co.,Ltd.
PAGE 2
Contents 1. Product Code Information ----------------------- 2. Luminous Flux Characteristics ----------------------- 10 3. Characteristics ----------------------- 15 4. Typical Characteristics Graph ----------------------- 17 5. Outline Drawing & Dimension ----------------------- 26 6. Reliability Test Items & Conditions ----------------------- 27 7. Solder Conditions ----------------------- 28 8. Tape & Reel ----------------------- 29 9. Label Structure ----------------------- 30 10.
PAGE 3
1. Product Code Information 1) Luminous Intensity Bins (Ts = 25℃) Nominal CCT Sorting Condition cd@100mA Product Code SPMWHT325AD5YBW0S0 Intensity Rank S0 2700K SPMWHT325AP4YBW0S0 3000K 3500K 4000K SPMWHT325AD5YBV0S0 SPMWHT325AD5YBU0S0 SPMWHT325AD5YBT0S0 SPMWHT325AD3Y0R0S0 S0 S0 S0 S0 S0 5000K SPMWHT325AD5YBR0S0 5700K 6500K SPMWHT325AD5YBQ0S0 SPMWHT325AD5YBP0S0 S0 S0 S0 Intensity Bin Intensity Range (cd) S1 16.6 ~ 18.9 S2 18.9 ~ 22.2 S3 22.2 ~ 25.5 S1 18.9 ~ 20.8 S2 20.
PAGE 4
2) Luminous Flux Bins (Ts = 25℃) Nominal CCT Product Code SPMWHT325AD5YBW0S0 Flux Rank S0 2700K SPMWHT325AP4YBW0S0 3000K 3500K 4000K SPMWHT325AD5YBV0S0 SPMWHT325AD5YBU0S0 SPMWHT325AD5YBT0S0 SPMWHT325AD3Y0R0S0 S0 S0 S0 S0 S0 5000K SPMWHT325AD5YBR0S0 5700K 6500K SPMWHT325AD5YBQ0S0 SPMWHT325AD5YBP0S0 S0 S0 S0 Sorting Condition lm@100mA Flux Bin Flux Range (lm) S1 51 ~ 58 S2 58 ~ 68 S3 68 ~ 78 S1 58 ~ 64 S2 64 ~ 70 S3 70 ~ 80 S1 51 ~ 60 S2 60 ~ 70 S3 70 ~ 80 S1 51
PAGE 5
3) Color Bins (Ts = 25℃) 1) Color Binning Nominal CCT 2700K 3000K 3500K 4000K Product Code Color Rank Chromaticity Bins SPMWHT325AD5YBW0S0 W0 (Whole Bin) SPMWHT325AD5YBWHS0 WH (Half Bin) W5,W6,W7,W8,W9,WA,WB,WC SPMWHT325AD5YBWMS0 WM (M4 Bin) W6,W7,WA,WB SPMWHT325AD5YBV0S0 V0 (Whole Bin) SPMWHT325AD5YBVHS0 VH (Half Bin) V5,V6,V7,V8,V9,VA,VB,VC SPMWHT325AD5YBVMS0 VM (M4 Bin) V6,V7,VA,VB SPMWHT325AD5YBU0S0 U0 (Whole Bin) SPMWHT325AD5YBUHS0 UH (Half Bin) U5,U6,U7,U8,U9,UA,UB,UC SPMW
PAGE 6
2) Chromaticity Region & Coordinates http://www.samsungled.
PAGE 7
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y W rank (2700K) V rank (3000K) 0.4373 0.3893 W1 W2 W3 W4 W5 W6 W7 W8 0.4418 0.3981 0.4475 0.3994 0.4465 0.4071 W9 0.4513 0.4164 0.4573 0.4178 0.4147 0.3814 V1 0.4183 0.3898 0.4242 0.3919 0.4221 0.3984 V9 0.4259 0.4073 0.4322 0.4096 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4475 0.3994 0.
PAGE 8
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y U rank (3500K) T rank (4000K) 0.3889 0.3690 U1 U2 U3 U4 U5 U6 U7 U8 0.3915 0.3768 0.3981 0.3800 0.3941 0.3848 U9 0.3968 0.3930 0.4040 0.3966 0.367 0.3578 T1 0.3726 0.3612 0.3744 0.3685 0.3702 0.3722 T9 0.3763 0.376 0.3782 0.3837 0.3953 0.3720 0.4010 0.3882 0.3686 0.3649 0.3719 0.3797 0.3953 0.3720 0.4010 0.3882 0.3726 0.3612 0.3763 0.376 0.3981 0.3800 0.
PAGE 9
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y R rank (5000K) P rank (6500K) 0.3371 0.3490 R1 R2 R3 R4 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 R5 0.3440 0.3428 0.3429 0.3307 0.3068 0.3113 P1 0.3144 0.3186 0.3130 0.3290 0.3093 0.2993 P5 0.3161 0.3059 0.3144 0.3186 0.3366 0.3369 0.3361 0.3245 0.3048 0.3207 0.3068 0.3113 0.3451 0.3554 0.3440 0.3428 0.3144 0.3186 0.3161 0.3059 0.3533 0.3620 0.3515 0.
PAGE 10
2. Luminous Flux Characteristics (Ts = 25℃) Nominal Minimum CCT CRI1) 2700K 3000K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.71 0.29 33 116 100 5.96 0.60 61 103 110 5.99 0.66 66 101 120 6.03 0.72 72 99 130 6.06 0.79 77 98 140 6.09 0.85 82 96 150 6.11 0.92 87 95 160 6.14 0.98 91 93 170 6.17 1.05 96 91 180 6.20 1.12 100 90 190 6.23 1.18 104 88 200 6.27 1.25 109 87 50 5.71 0.29 34 120 100 5.96 0.60 64 108 110 5.99 0.
PAGE 11
Nominal Minimum CCT CRI1) 3500K 4000K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.71 0.29 35 124 100 5.96 0.60 65 109 110 5.99 0.66 69 105 120 6.03 0.72 75 103 130 6.06 0.79 80 102 140 6.09 0.85 84 99 150 6.11 0.92 90 98 160 6.14 0.98 96 97 170 6.17 1.05 100 95 180 6.20 1.12 105 94 190 6.23 1.18 108 91 200 6.27 1.25 112 89 50 5.71 0.29 36 127 100 5.96 0.60 68 114 110 5.99 0.66 74 112 120 6.03 0.72 79 110 130 6.06 0.
PAGE 12
Nominal Minimum CCT CRI1) 5000K 5000K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.70 0.29 42 147 100 5.97 0.60 79 132 110 6.02 0.66 85 128 120 6.06 0.73 92 127 130 6.10 0.79 98 124 140 6.15 0.86 105 122 150 6.18 0.93 111 120 160 6.22 1.00 117 118 170 6.26 1.06 123 116 180 6.30 1.13 129 114 190 6.33 1.20 134 111 200 6.37 1.27 140 110 50 5.71 0.29 37 131 100 5.96 0.60 69 116 110 5.99 0.66 76 115 120 6.03 0.
PAGE 13
Nominal Minimum CCT CRI1) 5700K 6500K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.71 0.29 38 132 100 5.96 0.60 69 116 110 5.99 0.66 75 114 120 6.03 0.72 81 112 130 6.06 0.79 87 110 140 6.09 0.85 92 108 150 6.11 0.92 98 107 160 6.14 0.98 103 105 170 6.17 1.05 108 103 180 6.20 1.12 113 101 190 6.23 1.18 118 100 200 6.27 1.25 123 98 50 5.71 0.29 38 133 100 5.96 0.60 69 115 110 5.99 0.66 76 114 120 6.03 0.72 82 113 130 6.
PAGE 14
Nominal Minimum CCT CRI1) 2700K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.71 0.29 37 128 100 5.96 0.60 68 113 110 5.99 0.66 74 112 120 6.03 0.72 79 110 130 6.06 0.79 84 106 140 6.09 0.85 90 106 150 6.11 0.92 94 102 160 6.14 0.98 99 101 170 6.17 1.05 104 99 180 6.20 1.12 109 97 190 6.23 1.18 113 96 200 6.27 1.25 117 94 78 http://www.samsungled.
PAGE 15
3.
PAGE 16
3) Electro-optical Characteristics - Luminous Intensity and Flux Item Luminous Intensity (@100 mA, Ts = 25℃) Luminous Flux (@100 mA, Ts = 25℃) Unit cd lm CCT Rank 2700K (Ra 80) S0 2700K (Ra 78) S0 3000K S0 3500K S04) 4000K 5700K 6500K S0 5000K (Ra 68) S0 5000K (Ra 80) S0 2700K (Ra 80) S0 2700K (Ra 78) S0 3000K S0 3500K S04) 4000K 5700K 6500K S0 5000K (Ra 68) S0 5000K (Ra 80) S0 Min Typ Max S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 S1 S2 S3 16.6 18.9 22.2 18.9 20.
PAGE 17
4. Typical Characteristics Graph 1) Spectrum Distribution (Ts = 25℃) 2700K 3000K http://www.samsungled.
PAGE 18
3500K 4000K http://www.samsungled.
PAGE 19
5000K - CRI68 5000K - CRI80 http://www.samsungled.
PAGE 20
5700K 6500K http://www.samsungled.
PAGE 21
2700K - CRI76 http://www.samsungled.
PAGE 22
2) Forward Current Characteristics (Ts = 25℃) Relative Flux vs. Forward Current Forward Current vs. Forward Voltage http://www.samsungled.
PAGE 23
3) Temperature Characteristics Relative Flux vs. Ts(solder temp.) @ 100mA Forward Voltage vs. Ts(solder temp.) @ 100mA http://www.samsungled.
PAGE 24
4) Color shift Characteristics Color x,y vs. Forward Current http://www.samsungled.
PAGE 25
5) Derating Curve (Ta = 25℃) Rj-a = 30℃/W Rj-a = 21℃/W Rj-a = 12℃/W 6) Viewing Angle Characteristics Viewing Angle http://www.samsungled.
PAGE 26
5. Outline Drawing and Dimension Anode Cathode 1. Tolerance is ±0.1 mm 2. The maximum compressing force is 15N on the silicone ⓐ 3. Do not place pressure on the encapsulation resin ⓑ Recommended Land Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method ① Measure the nearest point to the thermal pad as shown above. If necessary, remove PSR of PCB to reach Ts point.
PAGE 27
6.
PAGE 28
7. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 seconds @Max. 300℃, under soldering iron. http://www.samsungled.
PAGE 29
8. Tape And Reel Anode Cathode Start End More than 40 ㎜ Mounted with More than (100~200)㎜ Leading part more than Unloaded tape Flash LED Unloaded tape (200~400)㎜ (1) Quantity : The quantity/reel to be 4,000 pcs. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 ㎜ (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10° angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no.
PAGE 30
9.
PAGE 31
10.
PAGE 32
2) Aluminum Packing Bag A1W1S1 SPMWHT325AD5YBW0S0 A1W1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / I001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag http://www.samsungled.
PAGE 33
11. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기 위해 저항 등의 설치를 권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며, 세정이 필요할 시에는 IPA 사용을 권장함.
PAGE 34
7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 만약 습도표시카드의 수치가 23±5℃에서 60% 이상이라면, 제품 실장 전에 baking해야 함. 8) Devices must be baked for 1 hour at 65±5℃, if baking is required. 만약 baking이 필요하다면, 제품은 65±5℃에서 1시간 정도 baking 되어야 함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기 방지장갑이나 손목밴드를 사용하기를 권장함.
PAGE 35
11) Risk of Sulfurization(or Tarnishing) The LED from Samsung Electronics uses a silver-plated lead frame and its surface color may change to black(or dark colored) when it is exposed to sulfur (S), chlorine (Cl) or other halogen compound. 삼성전자의 LED는 Ag(은)을 도금한 리드프레임을 사용함. 이 리드프레임의 표면이 황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로 바뀔 수 있음. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution.
PAGE 36
12. Hazard Substance Analysis Report http://www.samsungled.
PAGE 37
http://www.samsungled.
PAGE 38
http://www.samsungled.
PAGE 39
http://www.samsungled.
PAGE 40
http://www.samsungled.
PAGE 41
http://www.samsungled.
PAGE 42
http://www.samsungled.
PAGE 43
http://www.samsungled.
PAGE 44
http://www.samsungled.
PAGE 45
http://www.samsungled.
PAGE 46
http://www.samsungled.
PAGE 47
http://www.samsungled.
PAGE 48
http://www.samsungled.
PAGE 49
http://www.samsungled.
PAGE 50
http://www.samsungled.
PAGE 51
http://www.samsungled.
PAGE 52
Revision History Date No. Revision History 2012.12.13 000 2013.01.04 Writer Drawn Approved New version J.W.PARK Y.T.KIM 001 기종명 변경 : MP36S → LM362A J.W.PARK Y.T.KIM 2013.02.04 002 11. 유의사항에 VOCs 문구 추가 J.W.PARK Y.T.KIM 2013.04.03 003 Cx, Cy tol. 변경 : ±0.01 → ±0.005 J.W.PARK Y.T.KIM 2013.04.04 004 CRI78 2700K 기종 추가 J.W.PARK Y.T.KIM http://www.samsungled.