User's Manual
Table Of Contents
- Purpose
- Document Content and Organization
- Conventions
- Reference
- Revision History
- Symbols
- Caution
- Overview
- 1 Overview of Wireless LAN
- 2 Overview of OfficeServ 500 Wireless LAN
- 3 Components of OfficeServ 500 Wireless LAN
- 4 Specification of OfficeServ 500 Wireless LAN
- Hardware of OfficeServ 500
- Installation
- MMC Programming
- Maintenance
- WLAN (802.11b/DSSS) Specifications
- Antenna Beam Pattern of WBS24
CHAPTER 5. Maintenance OfficeServ 500 Wireless LAN Service Manual/Ed.00
Page 5-18
© SAMSUNG Electronics Co., Ltd.
3 Upgrading the 8WLI S/W
3.1 Connecting the Console Terminal to the 8WLI Card
1) In order to upgrade the 8WLI card software, either PC with the terminal
emulation on, such as a console terminal, or an ASCII terminal like VT-100 and
VT-220 types is used. When connecting the console terminal to the 8WLI card,
the console cable with 9-pin RS-232C connector as shown below is used.
Figure 5.17 Connecting Cable of the Console Terminal
2) Connect one end of the console to the RS-232C connector of the 8WLI card, and
connect the other end to the serial port of the console terminal(PC).
Figure 5.18 Connecting the Console Terminal to the 8WLI Card
RS-232C connector
Console cable
Console terminal