User's Manual
Table Of Contents
- Purpose
- Document Content and Organization
- Conventions
- Reference
- Revision History
- Symbols
- Caution
- Overview
- 1 Overview of Wireless LAN
- 2 Overview of OfficeServ 500 Wireless LAN
- 3 Components of OfficeServ 500 Wireless LAN
- 4 Specification of OfficeServ 500 Wireless LAN
- Hardware of OfficeServ 500
- Installation
- MMC Programming
- Maintenance
- WLAN (802.11b/DSSS) Specifications
- Antenna Beam Pattern of WBS24
OfficeServ 500 Wireless LAN Service Manual/Ed.00 CHAPTER 5. Maintenance
© SAMSUNG Electronics Co., Ltd. Page 5-11
Figure 5.8 Web screen for upgrading the WBS24 S/W (Initial screen)
Cautions against the roaming of the WBS24
If the PC is roamed to another WBS24 while upgrading, the upgrade will be
interrupted and the flash memory will not be functioning. Accordingly, locate the PC
as close as possible from the WBS24. To prevent roaming to another WBS24, it is
recommended that all of the WBS24 power should be turned off for safety.
2) Select the [Upgrade] menu. The user name and password will be asked if
connected for the first time. Enter the user name and password by inquiring from
the system manager.(Example : User name, Password-wlan)
Figure 5.9 Web screen for upgrading the WBS24 S/W (Screen to enter a password)